thin wall adhesive coating heat shrink tube

Specifications thin wall adhesive coating heat shrink tube

Dual thin wall

Shrink ratio 3:1;4:1

Halegen free

Flame retardant .UL certificat

thin wall adhesive coating heat shrink tube S3 (t) Flame retardant Thin Wall Heat Shrinkable Tubing Voltage Class 1kVIdeal for insulation and waterproof protection Co-extruded dual wall tubing with polyolefin outer layer for insulation, corrosion resistance, stress release and heat melt adhesive inner layer for waterproofing and mechanical stress relief. Applications Waterproof wire or wire bundle Sealing of wire joints Features/Benefits High Shrink Ratio: 3:1 & 4:1 Halogen free, environmental friendly Adhesive inner layer, waterproof and seal against moisture Flame Resistant: UL VW-1 Grade (Outer Layer) Temperature Range Operating Temperature : -40 ~ 125 ºC Shrink Temperature : 125 ºC Color:Black Certification Certified by UL, E236437 (Outer Layer) Product Code Cross References Raychem/Tyco : ATUM DSG Canusa : CPA100 Sumitomo : W3B2 3M : EPS400/EPS300 LG : GSHS-3635W   Technical Details  

Test item	Test method	Typical value
Tensile strength	ASTM D2671	≥ 10Mpa
Break down elongation	ASTM D2671	> 400%
Tensile strength after aging	ASTM D2671	≥ 10Mpa
Break down elongation after aging	ASTM D2671	> 300%
Flammability	UL224	VW-1
Water absorption	ASTM D570	≤ 0.5%
Heat shock	200 for 30 minutes	No drop/no flow
Low temperature flexibility	-40 for 4 hours	No cracking
Dielectric strength	ASTM D2671, at 2500V AC for 60 seconds	pass
Copper corrosion	UL224, at 158 ºC for 168 hours	pass
Volume Resistivity	ASTM D2671	>1014Ω.cm

  Production selection Shrink ratio: 3:1  

Product Code	Min.Wall thickness After shrink (mm)	Normal length(m/roll;pc/m)
S3(t)-3.2/1.0	1.0	200
S3(t)-4.8/1.6	1.1	100
S3(t)-6.4/2.1	1.0	100
S3(t)-7.9/2.6	1.4	50
S3(t)-9.5/3.2	1.4	50
S3(t)-12.7/4.2	1.5	1.22
S3(t)-15.0/5.0	1.5	1.22
S3(t)-19.1/6.0	2.2	1.22
S3(t)-25.4/8.0	2.3	1.22
S3(t)-30/10	2.4	1.22
S3(t)-39/13	2.5	1.22
S3(t)-51/17	2.5	1.22
S3(t)-64/21	2.8	1.22

  Shrink ratio: 4:1  

Product Code	Min.Wall thickness After shrink (mm)	Normal length/pc (m)
S3(t)-4.0/1.0	1.0	1.22
S3(t)-6.0/1.5	1.1	1.22
S3(t)-8.0/2.0	1.2	1.22
S3(t)-12.0/3.0	1.4	1.22
S3(t)-16.0/4.0	1.7	1.22
S3(t)-20.0/5.0	2.0	1.22
S3(t)-24.0/6.0	2.1	1.22
S3(t)-32.0/8.0	2.4	1.22
S3(t)-52.0/13.0	2.4	1.22

  ID: Internal Diameter Ordering When ordering this product, please specify 1) Product code 2) Color 3) Quantity Required in number of rolls