Thermal insulation ceramic coating, Plasma coating machine for thermal insulation ceramic coating

Specifications 1.It can spray all kinds of metal material as,alloy,ceramic

2.Anti-corrosion

3.High-temperature-resistant

4.thermal insulatio

   Thermal insulation ceramic coating, Plasma coating machine for thermal insulation ceramic coating       Plasma spray machine can spray all kind of Metal powder, such as Ceramic powder ( Chrome oxide, Titanium oxide, Aluminum oxide,  Zirconium oxide, etc.), Alloy powder (WC-Co, Cr3C2-NiCr), Chrome, Titanium,  Silicon powder, etc.    Plasma spray has become an indispensable way of processing in the fields of modern industries, national defenses, and science and technology. All kinds of metal, alloy, ceramic, and cermet can be used through plasma spray to make good wearable, anti-corrosive, high-temperature-resistant, high-temperature-oxidation-resistant, conducting or insulated, far infrared radiation coating. Plasma spray is an effective way for the work piece to gain good working performance, prolong its useful life, improve quality, and save precious metal material.   Configuration of SX-80 plasma spray equipment   SX-80 absorbs the experiences of PT-A3000 and METCO-9M plasma spray equipment and its performance level is equivalent to METCO-9M. It mainly consists of main electricity supply, control cabinet, transfer box, powder feeder, spray gun and heat exchanger.   SX-80 Main power supply   silicon controlled rectifier, biggest input power 105kw, duty cycle 100%, biggest output power 80kw, electric current fluctuation range ±1-2%,when electric grid fluctuation is within ±15%, it can normally work.   SX-80 Transfer box It's the transfer center of spray equipment which connects power supply, control cabinet, heat exchanger and spray gun together. It has high-frequency ignition, waterway and gas circuit alarm equipment insides. The box can be moved freely and the standard length of cable is 5m.   SX-80 Control cabinet  It’s the control center of the whole spray equipment. Single-phase 220V, 1KW, float flowmeter equipped, current and voltage digisplay.  Having manual, automatic and economic working modes. Alarm and malfunction indicating function, generally it alarms under such conditions: when the main and assistant gas pressure<0.3MPa or the main gas flow rate<30L/min when water temperature>50°C or water flow rate<8L/min   SX-80 Powder feeder   Supply one set of two-tubed powder feeder  powder measurement scope: 5-200μm; powder repeated-feeding error rate<±1%  The two tubes can feed powder at the same time, feeding rate is between 20-150g/min.   SX-80 Spray gun Supply imitative METCO 9MB spray gun, main working gas is argon or nitrogen, assistant gas is hydrogen. Working electric current: 100-800A. Working voltage: Ar+H2: 50-75V, N2+H2: 50-80V 1. Imitative 9MB machine-made gun 2. Imitative 9MB manual-made gun 3. Large-inner-hole spray gun Supply spray gun accessories: GH,G,GP,GE type spray mouth, powder feeding and cooling air jetting-shelf, water cooled cable, electrode tip, insulator, obturating ring, special purpose tools. Also we can supply customer imitative F4 spray gun (machine-made or manual-made) and accessories such as water cooled cable, spray mouth, electrode tip, powder feeding shelf, powder feeding mouth, obturating ring and special purpose tools.   SX-80 Heat exchanger   We provide two kinds of heat exchangers: (1), water pumping heat exchanger has interior and exterior circulation. The interior circulation cools down the spray gun by distilled water, while the exterior circulation cools down the distilled water by tap water. We use imported water pump and below is the parameter of this heat exchanger:     

the cooling capacity	20000kcal/h	power	8KW
Pump pressure	0.8MPa	Water flow	8-20L/min
Water temperature regulating scope		20-38°C

  (2), Freon- refrigerated heat exchanger consists of imported compressor, water pump, and heat exchanger.       

the cooling capacity	25000kcal/h	power	13KW
Pump pressure	0.8MPa	Water flow	8-20L/min
Water temperature regulating scope		10-28°C

    Other main thermal spraying equipments and service:   (1)  Vacuum plasma spray machine   (2)  Thermal spray coating services   (3)  HVOF spray equipment   (4)  Plasma spray equipment   (5)  Arc spray equipment   (6)  Sputter Target Produce Equipment and technology   (7)  Industrial water chillers      (8)  Precious metal vacuum coating equipment   (9)  Cooker magnetism and thermal conduction coating spraying production line   (10) Electro Brush Plating Equipment   (11)  High power flame plastic spray equipment   (12) Arc spray wire   (13) Thermal spray powder     ...