The best quality wet pan mill for gold grinding with the lowest price

Specifications grinding mill for gold

1.high efficiency

2.easy installation and maintenance

3.CE&ISO9001

4.durable

The best quality wet pan mill for gold grinding with the lowest price
  Specifications of wet pan mill: The wet pan mill is a new mill, small investment, high yield, the production cost is low, good benefits. The wet pan mill is named by the diameter of roller. Φ1300,Φ 1350,Φ 1400,Φ 1500,Φ 1600 is suitable for selection of iron ore, molybdenum ore ,lead ore ,zinc ore, antimony ore and so on. Φ 850, Φ 900, Φ 1000,Φ 1100,Φ 1200 is suitable for selection of gold ore.   As their small investment, high yield, the production cost is low, good benefits, praised by users, domestic alternative to the ball mill equipment. Grind gold machine easy installation and maintenance, small investment, high yield, quick, low-cost production, is the ideal equipment for mine SMEs beneficiation.   Mainly used with gold, silver, lead, zinc, iron, molybdenum, copper, antimony mine, mine, all ball mill can be selected grind gold machine can be used. Characteristics: grind gold through the raw material mixing, rolling, crushing, rolling repeatedly reach moisture equilibrium ratio of uniform, low gas content, improve the forming rate and forming quality, grind the material through the machine molding Products with high density, good strength, no porosity ratio weight. Energy efficient, high volume of output, the product is used for iron ore process tailings recovery, not to slag the loss of effective resources can be fully utilized   Use and Maintenance of wet pan mill: 1. The normal operation of the mill, before they start feeding. 2. This machine prohibit strip start, the outage at boot time, you must first clean up the residual          ore in the middle of the milled slot and then start. 3. Should be uniform feeding not erratic, it is best to use the feeder. 4. Bearing frequent butter, gear box or car rear axle with frequent checks whether the loss of gear     oil. 5. Regular checks of the various parts of the screw is loose. 6. Found bearing damage must be promptly replaced, shaft eccentric avoid damage to other parts 7. Mill runtime to pay attention to that the reducer or bearing part of the presence or absence of         abnormal sound, whether the temperature is too high, the motor current is too large                           irregularities; should be shut down immediately if the above phenomenon, exclude. 8. Machine maintenance, to ensure safety, you must remove the motor belt.   Application of wet pan mill Mainly used with gold, silver, lead, zinc, iron, molybdenum, copper, antimony mine, mine, all ball mill can be selected grind gold machine can be used. Characteristics: grind gold through the raw material mixing, rolling, crushing, rolling repeatedly reach moisture equilibrium ratio of uniform, low gas content, improve the forming rate and forming quality, grind the material through the machine molding Products with high density, good strength, no porosity ratio weight. Energy efficient, high volume of output, the product is used for iron ore process tailings recovery, not to slag the loss of effective resources can be fully utilized.   Technical data of wet pan mill:

Model	Specification	Input size(mm)	Rotate Speed (r/min)	Powder(kw)	Weight(t)
1600A	1600×400×200×500±20mm	<30mm	20-22	25KW	14.5
1500A	1500×350×200×460±20mm		20-22	22KW	13.5
1500B	1500×350×150×460±20mm		20-22	22KW	12.3
1500C	1500×300×150×420±20mm		20-22	22KW	11.3
1400A	1400×250×150×350±20mm		16-18	18.5kw	8.5
1400B	1400×250×150×350±20mm		21-23	18.5kw	8.5
1350A	1350×250×150×350±20mm		16-18	18.5kw	8
1350B	1350×250×150×350±20mm		21-23	18.5kw	8
1300A	1300×250×150×350±20mm		16-18	15kw	7.5
1300B	1300×250×150×350±20mm		21-23	15kw	7.5
1200A	1200×200×80×250±20mm		17-19	7.5kw	5.5
1200B	1200×200×80×250±20mm		23-25	7.5kw	5.5
1100A	1100×200×80×250±20mm		17-19	7.5kw	5
1100B	1100×200×80×250±20mm		23-25	7.5kw	5
1000	1000×200×80×250±20mm		13-15	5.5kw

  Appearance of wet pan mill   Components and parts of wet pan mill    Structure chart of wet pan mill      Working site of wet pan mill       Our services 1.Pre-sale services: 1) Selecting equipment type;
2) Designing and fabricating the products in accordance with the special requirements of the clients;
3) Training technical personnel for our clients;
4) Providing construction and technology consultations or working out proper construction schemes for those new, special or difficult projects.
2.Services provided during the sale:
Respect our clients; present the clients with ease, relaxation and a surprise; devote ourselves to improve the total value of our clients.
1) Checking products acceptance ahead of delivery;
2) Introducing the service system to our clients.
3. After-sale services:
Improve the added value of our products, and let the clients free from the using troubles:
1) Assisting the clients preparing for the first construction scheme;
2) Installing and testing the equipments;
3) Training the first-line operators on site;
4) Examining the equipment regularly;
5) Taking the initiatives to eliminate the failure(s) rapidly at site;
6) Distributing the guarantee fittings door-to-door;
7) Providing technical exchanging;
8) Providing maintenance for big items.    Welcome to our factory!