Beijing Hongrun Career Automation Control Technology Co. Ltd
VISIT THE STORE Product description
ITMS4037 intelligent thermocouple to Modbus with alarms
Dual setpoint relay alarms
4-way isolation
PC configuration software
Accepts thermocouple, RTD, mV or resistance inputs
Supports Modbus RTU and ASCII modes
The ITMS4037 intelligent temperature to Modbus conditioner withalarms accepts a wide range of temperature sensors (thermocoupleand RTD elements), and converts the signal into a register formatthat can be read using either ASCII or RTU Modbus protocol
The ITMS allows a choice of either Fahrenheit or Celsiusreadout with 0.1 or 1 degree of resolution
An offset value can be programmed to scale the input signal tomeet most process requirements
Additionally, two setpoint values can be entered for dual relayprocess monitoring alarms
The ITMS is programmed with Windows based SFIMS software
The software allows configuration, calibration, and storage ofITMS program files
Additionally, all setup parameters can be interrogated andmodified through Modbus register and coil commands
The RS485 port allows the ITMS to be multidropped, with baudrates up to 38400
The CBPRO007 programming cable converts the RS232 port of a PCto RS485, and is terminated with an RJ-11 connector
The bidirectional capability of the CBPRO007 allows it to beused as a permanent interface cable as well as a programmingcable
The ITMS's two relay alarms can be configured independently forabsolute high or low acting with balanced or unbalancedhysteresis
Alarm 2 can also be configured for deviation and band alarms,in these modes, setpoint 2 tracks setpoint 1
Adjustable alarm trip delays can be used for delaying outputresponse
The alarms can be programmed for automatic or latching
Latched alarms can be reset with a serial command or a userinput
A standby feature suppresses the alarm during power-up untilthe temperature stabilizes outside the alarm region