T1800FZ-PL

This standard pallet wrpping machine is widely used in many area. This autoamatic pallet wrapping machine is very good. It can be used more than 10 years.

1) .Technology data:

Max load size (mm)

1200 (L) × 1200 (W) × 2000 (H) mm

Packing efficiency

20-40 loads / hour

Turntable turning speed

3-15 rpm

Turntable diameter

2000mm

Height of turntable

450mm (Adjustable)

Power supply

2.0KW 220V 50HZ 1Phase (Adjustable)

Max load capacity

2000kgs

Wrapping requirement

Bottom wrapping up to 2/3 of pallet, top wrapping 15cm higher than the height of pallet (Adjustable)

Working ambiance

Indoor, normal temperature

Options

Turntable diameter: 1800mm / 2000mm / 2500mm

Turntable height

Color

2). Wrapping material

Stretch wrapping film: Core size: 3``

Film width: 500mm

Diameter: max 260mm

Thickness: 20-35μm

One roll stretch film to be supplied along with machine for trial running

3). Utility:

Compressed air

Pressure: 0.5-0.6 MPa

Dew point: + 2- + 10 ° C (7bar, + 2- + 10 ° C)

 Air consumption: 1000ml / min

4). Supply scope

Automatic turntable stretch wrapping machine 1 set

4.1) rotating turntable 1set

Diameter: 1800mm

Roller dia .: 76mm

Distance between rollers: 119mm

4.2) mast with film carriage 1 set

Film carriage lifting driving: chain driving, good stability and high reliability

Driving reducer: worm gear reducer

Open type film carriage

Motor brand: SEW; power: 0.37kw

4.3) Film feeding & cutting device 1set

When stretch wrapping finish, the film will be cut and clamped automatically.

When the film tail is released from the clamp, the air shooter will blow the film tail up, then the film tail will be wrapped by stretch film and keep it tightly with the pallet to ensure no film tail produced.

Film hot melt cutting adopts electrical heating wire to cut the film.

After film being cut, the hot sealer will seal the film tail automatically to ensure no film tail come out.

Pneumatic component: FESTO brand