Specifications RGB LED Strip 5050 with music controller
1.RGB 5050 SMD LED flexible strips
2.flash with the music rhythm
3.SMD5050 60PCS/M
LED SMD flexible Strips can be controlled by music controller. that will falsh with the music, very coolhttp://www.tudou.com/programs/view/ua6v-l78ZFk/ check the video 1. LED SMD flexible Strips Technique Parameters:
Specification |
Product Name | SMD5050 Flexible LED Strip |
Model Number | VS-F150RGB-5050-12V |
Voltage | DC 12V/ 24V |
Output current | 300mA/ 150mA |
Power | 7.2W/M |
Light source | SMD 5050 LED |
LED Number | 150pcs per roll |
Dimension | 5000 x 12 x 0.2 mm |
Beam angle | 120 degrees |
Color range | Single color & RGB |
Lifespan | >50,000 hours |
Working temperature | -40~+50 °C |
PCB | FPC |
Protection rate | IP67 (IP20 is available) |
Certificate | CE, RoHS |
Luminious flux | 2500lm (5500K-6000K) |
Color temperature | 3000K-7000K |
Power factor | 0.85-0.99 |
2.led strips application: back light, decoration, KTV 3. LED SMD flexible Strips Connection: R/Y/B/G/W Single color waterproof LED strip series: There are two wires for the product(Wire Pathway 22AWG; Wire Length 150MM), the Red one is connected to the posivtive section of the power supply while the Black one is for the cathode. If use the controller, the Red one is connected to the positive section of the controller while the Black one is for the cathode. See the diagram for better understanding: 4. LED SMD flexible Strips Installation: 3M double glue on the back of the product. Rive off the protection paper then install the product to anywhere you need to. 5. LED SMD flexible Strips Installation Notice: 1) Make sure the connection is correct according to the diagram. 2) Pay attention on the parameters limit on the above form. DO NOT run over the peak value. 3) Keep the surface of installation clear and level avoid breaking off. 4) Avoid the crook area is the just the position of LED and other components, in order to protect the product and extend the life span of the product.