Smooth Clear Surfboard Deck Proection Tape with adhesive

I. Production Introduction Problems such as dings, nicks, scratches may happen while stocking and using the SUP paddle boards, which make the boards look bad or disfunctional and make you frustrated. Here our company developed the model AM-860A clear tape which is especially for this purpose, to protect your paddle boards from some such problems. The SUP Rail Tape can solve the above problems. III. Advantages of AM-860 1. With total thickness 0.7mm, to protect your rails from dings, nicks, and scratches. 2. Transparent color which seems part of the board; and you can still remain the intergrity of your own design. 3. Agressive adhesive to ensure the longativity of application. 4. Water-resistant and UV-resistant, high gloss to ensure no discolor or shrinkage.
   III. How to Apply Clean the surface properly to make sure there is no dust , oil or other impurities. Rinse thoroughly. Allow the surfaces to dry. Position tapes carefully before operation. Peel off paper backing; press tpes firmly in place making sure all edges have contact with surface. Do not use it for at least 12 hours after installation. IV: Remove      1. Lift corner of stickers with finger nail, wood, plastic or other non-abrasive scraper      2. Slowly peel back stickers until removed.      3.Clean with aerosol stain remover if there is any adhesive residue.      4.Allow to soak 15 minutes and wipe with a dry rag. Repeat as necessary.   Important: Apply above 10℃   Warning: Do not use on uneven or textured surfaces.