Small Size Portable Fingerprint Safe

Biometric Fingerprint Safe Box
Access Control at the Touch of a Finger
Biometric Fingerprint Safe Box is the ultimate solution to complete access control. Invented and developed by our company, Biometric Fingerprint Safe Box provides safe storage and easily controlled access for handguns, weapons, ammunition, jewelry and other valuable items including: Pharmaceuticals, coins, stamps, stocks, bonds, critical data and personal documents. Biometric Fingerprint Safe Box requires no external computer or power to function. Flash memory retains fingerprint data even during complete battery or electrical failure.
Box Contents: Shipped with your Biometric Fingerprint Safe Box are the following items:
(1)Biometric Fingerprint Safe Box
(2)Security Cable
(3)Instruction Manual

GETTING STARTED
Figure A

Make sure to remove the backup key from the Biometric Fingerprint Safe Box;
The key is for emergency use only to unlock the case in the event of fingerprint failure; .
If the key is used to access the Biometric Fingerprint Safe Box,
It can only be removed from the lock cylinder by returning the key back to its original locked position.
Please do not try to remove the key in any other position or this may cause damage
Do not try to use the fingerprint sensor and electronic locking system while the key is in the unit.

ENROLLING NEW USERS
1. Presss and hold the Enroll Button. You will hear one beep and the LED will flash green indicating the enrollment procedure has started
2. Place your finger over the sensor with the tip of your finger at the top of the finger guide as shown in Finger B
3. Made sure you have good, flat contact with the sensor. Begin to swipe your finger from Position1 to Positon 2 (indicated in Finger C), taking 1 to 2 seconds to complete the swipe. Try to get your entire fingerprint to cross the sensor.
4. Once the swipe is completed you will hear a beep. Repeat Step 3 one more times. If the swipe fails, the LED will flash red and the unit will wait for another swipe.
5. After swiping your finger 2 times the unit will beep twice, this indicates a successful Primary Enroll.
Fingerprint Access
1. Press the Start Button until the green LED turns on and the unit beeps once, wait for fingerprint enrolling.
2. Place your finger over the sensor with the tip of your finger at the top of the finger guide as shown in Figure B.
3. Make sure you have good, flat contact with the sensor. Begin to swipe your finger from Position1 to Positon 2 (indicated in Finger C), taking 1 to 2 seconds to complete the swipe. Try to get your entire fingerprint to cross the sensor.
4. If the fingerprint match, LED lights out and buzzer beeps two times, green LED light 1.5 seconds. You need to open the case manually during this period. If the fingerprints do not match, LED lights flash red, the case will not open. If the user who have enrolled can't be recognized, please try again. If the problem persists, please use the key to open the box and delete all enrolled fingerprints, then enroll users again.

Key Access
NOTE: Key Access is intended for backup use only.
1. Insert the key into the front of the unit.
2. Turn clockwise to unlock the unit.
3. Lift the top of the Biometric Fingerprint Safe Box to open.
4. To remove the key, close the Biometric Fingerprint Safe Box, turn the key counterclockwise.

LOCKING THE UNIT
1. Close both of the top and bottom covers, the case will be locked automatically.

DELETING USERS/RESETTING THE UNIT
NOTE: Individual users cannot be deleted from the Biometric Fingerprint Safe Box. All users will be deleted together.
1. To delete all fingerprints currently stored on the Biometric Fingerprint Safe Box, press and hold the Delete Button, the LED will turn red.
2. Continue to hold 3 seconds, LED lights flash green and beep twice, this indicates a successful deletion of all fingerprint users.