1 / 4
Model No. : | Minimat S |
---|---|
Brand Name : | Jiahong |
Product description
Single Conductor 230v Under Floor Heating Mat Floor Heating System Electric Heating Mat |
They combine the highest comfort levels with maximum energy efficiency. It’s a proven safe, reliable and energy efficient technology.
The MinimatS floor warming system includes a yellow heating cable woven into an adhesive-backed red fiberglass mesh that allows for simple roll-out installation without worrying about the heating cable spacing. |
Cable Construction | Single conductor with screen |
Rated Voltage | 230V |
Output | 100W/m2 and 150W/m2 |
Cable Spacing | 100mm and 66.7mm |
Cable Diameter | 2.6mm |
Cable Conductor Insulation | Fluoropolymer |
Cable Outer Insulation | PVC |
Max. Rated Temp. | 85°F(30°C) |
Min. Installation Temp. | 40°F(5°C) |
Cold lead | Two wires plus ground braid; 2.5m length each |
WuHu Jiahong New Material Co. Ltd is the largest heating cable manufacturer in Asia-pacific. We are always dedicated to research, develop and produce both constant wattage and self-regulating heating cables since 1993. Till now, Jiahong has obtained more than 30 national patents. We are one of the few members of China self-regulating heating cable national standard GB/T 19835-2005.
|
The warm up time of an electric underfloor heating system will be dictated by the insulation used beneath it and the output of the system. In general, the better insulated the sub-floor the faster the system will warm up, with Underfloor Insulation boards?facilitating a very speedy warm up time of as little as 15 minutes, and un-insulated concrete floors causing the slowest warm up time. Using a?200W system?beneath ceramic/stone tiles provides a faster warm up time than 150W system. |
If you have installed your heating beneath tile adhesive, levelling compound or a screed you must allow this to dry out before turning on your system for the first time. If the system is turned on too early it will force the moisture out of the covering which may lead it to crack. We would recommend speaking to the manufacturer of your flexible tile adhesive, grout or screed to confirm the drying time required. |
We would recommend that each room has its own heating system controlled by its own thermostat. This will allow for simpler and more accurate temperature control of each room and will avoid heating rooms which do not require it. |
Send your inquiry to this supplier