Specifications Silica sand Flash Dryer
1,The powder was made from solution directly.
2,Apply to powder,granule
3,Feeding stably
General Application of Silica sand Flash Dryer
Hot air enters into stirring and drying chamber from the bottom of dryer with suitable atomizing speed. It exerts strong shearing, blowing, floating and rotating effect to raw material. Therefore raw material is granulated through centrifugating, shearing, impacting and friction effect. It strengthens the process of heat exchange. At the bottom of dryer, the large and damp granule is crushed under the action of stirrer and the granule that is small in particle and contain less moisture will lift accompanied with revolving air stream. During the period of lift, it is dried further. Because gas and solid two phases flow in heat exchange, so the machine has strong drying capacity Feature of Silica sand Flash Dryer
1,Hot air enters into stirring and crushing and drying chamber from the bottom of drier with suitable atomizing speed. It exerts strong shearing, blowing, floating and rotating effect to raw material 2,Dry gas enters into the bottom of drier,generating strong rotating airflow, thus making a strong rushing effect for the material stuck on the wall to eliminate the phenomenon that the material stuck on the wall. 3,In the high temperature zone of the bottom of dryer, heat sensitive material does not close contact with hot surface, and special device was equipped at the bottom of dryer to solve the problem that the coking discoloration of heat-sensitive materials. 4,Due to the high speed of gas at circle inside the drying chamber and the staying time of raw material is short, high efficiency and quick speed can be realized. 5,There are elutriation ring and rotating flow at the top of the drying chamber to control the size and temperature of the product. So it can meet the requirement moisture and granule of different raw material. Application scope of Silica sand Flash Dryer
Atrazine (pesticides),lauric acid cadmium benzoic acid, sodium oxalate, sterilization Dan, cellulose acetate, organic pigments, etc Dyestuff : Anthraquinones, black iron oxide, indigo dye, butyrate, titanium oxide, zinc sulfide, various azo dye intermediates Inorganic substance: Borax, calcium carbonate, hydrogen peroxide, copper sulfate, ferric oxide, TanSuanBei, three antimony oxide, all kinds of metal salt,synthetic cryolite etc. Food: Soybean protein, gelatinized starch, vinasse, triticum, wheat starch Technical parameters of Silica sand Flash Dryer
model | dia of barrel(mm) | size of main machine(mm) | power of main machine(Kw) | air processing volume(m3/h) | evaporated capacity(kg/h) | occupied area(mm2) | XSG-2 | 200 | 250?800 | 0.75-2.2 | 300-800 | 10-20 | 3500×2500 | XSG-3 | 300 | 400?300 | 3-4 | 600-1500 | 20-50 | 3800×2700 | XSG-4 | 400 | 500?500 | 4-7.5 | 1250-2500 | 25-70 | 4000×3000 | XSG-5 | 500 | 600?000 | 5.5-11 | 1500-4000 | 30-100 | 4200×3200 | XSG-6 | 600 | 700?200 | 7.5-18.5 | 2500-5000 | 40-200 | 4250×3250 | XSG-8 | 800 | 900?600 | 11-18.5 | 3000-8000 | 60-600 | 4500×3500 | XSG-10 | 1000 | 1100?000 | 15-30 | 5000-12500 | 100-1000 | 4750×3750 | XSG-12 | 1200 | 1300?200 | 15-37 | 10000-20000 | 150-1300 | 5000×4000 | XSG-14 | 1400 | 1500?400 | 30-55 | 14000-27000 | 200-1600 | 5250×4250 | XSG-16 | 1600 | 1700?000 | 45-75 | 18700-36000 | 250-2000 | 5500×4500 | Notes::1.The evaporated amount of moisture is calculated when the temperature of inlet is 200°C and the temperature of outlet is 80°C 2.Besides the models above mentioned, specification can also be made as request. 3.the datum above is for standards, it can be obviously reduced according to different power . name of raw material | Znic stearate | Alumium hydroxide | Znic carbonate | pesticide | TMTD | DSDacid | Iron oxide red | tellurium dioxide | Cuprous chloride | White carbon black | inlet air temp. | 150 | 180 | 150 | 120 | 140 | 150 | 200 | 180 | 200 | 280 | initial water content | 80 | 55 | 80 | 30 | 65 | 60 | 60 | 45 | 30 | 85 | final water content | 0.5 | 1.5 | 1.0 | 1 | 0.5 | 0.5 | 0.5 | 1.0 | 3 | 5 | actual drying capacity | 140-160 | 250-280 | 130-170 | 80-110 | 80-120 | 80-120 | 300-350 | 280-320 | 290-310 | 250-300 | name of raw material | promoting agentsZDC | Oil ink | Mancozeb | Fast blue | Citric acid calcium | superfine Calcium carbonate | Mud treating-agent | Sodium isocyanurate sioxide | Dichloroisocyanurate | inlet air temp. | 150 | 150 | 120 | 150 | 140 | 160 | 200 | 180 | 150 | initial water content | 60 | 45 | 30 | 55 | 40 | 70 | 75 | 25 | 30 | final water content | 0.5 | 2 | 1.0 | 1.0 | 1.0 | 1.5 | 5 | 0.2-2 | 1.0 | actual drying capacity | 80-110 | 350-380 | 120-150 | 160-180 | 300-350 | 430-470 | 290-310 | 80-120 | 90-150 | Send your inquiry to this supplier Send Inquiry
| |