Specifications 1. MG1 MG4 MG6 MG60 MG50 MG9 M7N 104 59U
2. bearing bushings SIC ring
3. graphite ring
4. carbide,ceramics ring
SIC ringsas follows:1.MG1, M7N, G9, G60, G4 and 59U. 2.Bearing bush SIC ring. 3.Various types of pump seal components. Applications:1.pumps, mixers, blenders, agitators, refrigeration compressors, blowers, fans, and other rotary shaft equipment 2.pulp and paper, food processing, water, wastewater, refrigeration, chemical processing, and other demanding applications.
Parameter | SSiC | RBSiC | Carbide SiC | Purity( % ) | >97 | >90 | 30% | Hardness( HRA ) | ≥90 | ≥90 | ≥85 | Grain Size( um ) | 0.5-0.7 | 8-20 | 20-40 | Density( g/cm3 ) | 3.06-3.15 | >3.05 | >2.65 | Bend Strength( MPa ) | 400-580 | 350-450 | 200 | Compressive Strength(MPa) | 3900 | >2500 | 1800 | Fracture Toughness( MPA ) | 3.05-4.6 | 4.3 | | Elastic Modulus( GPa ) | 380-410 | 420 | | Thermal Conductivity(W/M.K) | 102.6 | 35-110 | 125 | Coefficient of heat Expansion( L/°C ) | 4.02x10-6 | 4.3x10-6 | 3x10-6 | Poisson Ratio | 0.14 | 0.15 | Main Performance Index of Silicon Carbide(SIC) | Purity(SIC percentage)%: | ≥90 | Density(g/cm3): | 3.05 | Hardness(HS): | 110-125 | Elastic modulus(MPa) : | 4.12×105 | Poisson ratio : | 0.15 | Tensile strength(MPa) : | 2.75×102 | Bending strength (MPa) : | 4.41×102 | Compression strength (MPa) : | 2.94×103 | Thermal conductivity(cal/cm.s.) : | 0.30 | Coefficient of thermal expansion(l/) : | 4.3×10-6 | Heat resistance(in the atmosphere) : | 1600C | Thermal impact coefficient(cal/cm.sec) : | 46.5 | Acid resistance: | 5 times higher than the usual WC | , : Send your inquiry to this supplier Send Inquiry
|