Shallow Petroleum / Gas Drilling Rigs , Mineral Exploration Drill Rigs Cmd100
Shallow Petroleum / Gas Drilling Rigs , Mineral Exploration Drill Rigs Cmd100
Shallow Petroleum / Gas Drilling Rigs , Mineral Exploration Drill Rigs Cmd100

1 / 1

Shallow Petroleum / Gas Drilling Rigs , Mineral Exploration Drill Rigs Cmd100

Get Latest Price
Send Inquiry
Model No. :
Brand Name :

Product description

Type: Truck Chassis Mounted Drilling Techniques: Circulation Coring Drilling , Diamond Core Drilling
Usage: Natural Gas Drilling And Mineral Investigation

 

Shallow Petroleum / Gas Drilling Rigs , Mineral Exploration Drill Rigs CMD100

 

Main Introduction:

 

CMD100 is designed for coalbed gas drilling, water well drilling, mine rescue drilling, shallow petroleum/ natural gas drilling and mineral investigation etc.

 

The following below defines all the drilling techniques of CMD100

 

· Circulation coring drilling

· Single wall rod, air-lift RC drilling  

· Auger drilling

· Diamond core drilling  

· DTH hammer, normal circulation drilling/RC drilling

The whole system consists of rotation head, feed system, power unit, mast, truck base, jib boom&winch, power break out, foot clamp and water pump, etc.

 

 

The features below defines CMD100 coalbed gas drilling rig

 

1.Truck chassis mounted for easy transport and less working intensity.

2. The whole rig is driven by hydraulic and equipped with kinds of safety guards on controls of  pulling force, feed force, output torque and drill head feed locking, etc.

3. Due to design of two gear shift on drill head, difference torque and rotation speed can be realized and meet requirements of different hole size and drilling technique, max. torque 24,750N.m for big hole size drilling and max. rotation speed 300rpm for coring drilling.

4. Drill head can be set to 80° angle and main spindle floats 102mm, both for easy rod handling and less working intensity.

5. Drilling pressure can be adjusted precisely in accordance with geological conditions.

6. Braking system set on main shaft of drill head for directional drilling and horizontal drilling.

7. Telescopic design of mast facilitates rods&tools handling and provides 12.5m feed stroke.

8. Air/water pipe line mounted to connect related accessories of different drilling techniques, like fluid drilling, air drilling and foaming drilling, etc.

 

 

Specification:

 

1. FEED SYSTEM

 

1.1

Max. Pull

100 Ton

1.2

Max. Push

14.5 Ton

2. SLIPBOX

 

2.1

Max. hollow

810mm

2.2

Control Panel to Ground, Max. 

2.08m

3.DRILL HEAD

 

3.1

Rotation Speed

0-100rpm, low gear

0-300rpm, high gear

3.2

Output Torque

24,750N.m@0-100rpm

8,700N.m@0-300rpm

3.3

Spindle Hollow

105mm

torque controller mounted

4. MAST

 

4.1

Mast Length

after telescopic(full length)-21m

before telescopic-13.4m

4.2

Feed Stroke

15.2m

4.3

Rods & Casings

I(18-22 feet)     II(27-30 feet)         III(38-45feet)

4.4

Number of Jack Legs

6

5.DIMENSIONS

 

5.1

Gross Weight

60 tons

5.2

Transport Size

14.56*2.95*4.25m

6. TRUCK CHASSIS

San Jiang vehicle, 10X6 

7. POWER UNIT

 

7.1

Diesel Engine

Cummins KTA19-P750; 750hp @ 1800 rpm

7.2

Displacement

19L

8. PREHEAT SYSTEM

8.1

Model

engine coolant preheat

8.2

Description

  preheat engine coolant to 40-52°C for engine start when ambient temp. 

around -40°C

9. WINCH

9.1

Max Pull

5.5 tons

9.2

Winch Cable

35m x 14mm

10.AIR/MUD LINE

10.1

Mpa

20.6 Mpa

10.2

Air Compressor

option

10.3

Mud Pump

option

 

Send Inquiry

Product Alert

Subscribe to your interested keywords. We will send freely the latest and hottest products to your Inbox. Don't miss any trade information.

版权所有 © 宁波全贸信息技术有限公司 浙ICP备12012821号-1 浙B2-20200628