Sewage Treatment Lamella Clarifier LST for industry wastewater

        Lamella Clarifier LST Used in  Wastewater Treatment   Product Description  Principle of LST   The LST Settler is designed to remove particles from liquids. Its theory is put forward on the basis of Shallow tank, which tells the settling efficiency of sedimentation tank is only related to surface area. On LST the settling area is the total area of the inclined plates projected on a horizontal surface.This reduces the footprint of lamella settlers by about 90% as compared to conventional clarifiers and the efficiency of the sedimentation process is multiple increased.     Use of LST2-020
Suitable for all applications where sedimentation is the preferred technology,like:
    Electronic & electroplating wastewater,
    Paper & pulp wastewater,
    Industrial process water,
    Treatment before filtration,
    Filtrate and backwash water, 
    River water clarification,
    Sludge thickening, etc...     Features of LST2-020
  1. Design treatment capacity: 20 m3/h.   2. High-rate clarifier for high SS water (grit, clay, lime & mental particals).    3. Conical sludge hopper without sludge scraper.   4. High capacity on a minimal buliding area.
  5. Indoor or outdoor layout (environmental temperature should be over 0°C).    6. Lamella plates creats a good condition for laminar flow and reachs a better sedimentaion result.    7. Compact design minimizes hydraulic disturbances caused by wind or temperature changes. 
  8. Apply to automatic & continious operation.
  9. Design life: Carbon steel material: >10years;
                      Stainless steel material: >20years.   Advantages of LST2-020
  1. Less floor space: extend the lamella plates to 1.5m, which is designed to maximise settling efficiency with minimal footprint, reducing the footprint to as little as 10% of a traditional settling tank.
  2. Equal flow distribution: LST system adopts side of reverse flow and collects the clean water directly at the top. This method of feed control guarantees equal distribution to all lamella chambers.
  3. Excellent condition for laminar flow: no blind angle, no short circuiting or surface turbulence.
  4. No blockage and adherence: plates are supported and inclined at the optimum angle of 60° and the space distance is 8~10cm. Backwash pipes are equipped under the lamellar packs.
  5. Rugged and durable: the material of lamella plates is UPVC with a thickness of 6mm, which placed in packs, highly strengthened and easy to washing and maintenance.
  6. Positive sludge discharge: packaged settling unit with a conical sludge hopper, increaseing sludge thicking capacity, greater sludge storge and surge capacity.
  7. Easy to transport: total height is less than 3m, can be shipped by standard container to discharging port.   Specifications of LST2-020

No	Category	Description
1	Tank	Q235B Tank
		Q235B Reinforcement
		UPVC Lamella Plates δ = 6mm
		SUS304 Collection Water Container      Type: Perforation of the Catchment
		SUS304 Outflow Weir Plate                 Type: Level of weir plate
		Adjustable Liquid Level Gauge
		Q235B Frame
		Conical Sludge Hopper

           Collection Water Container       Outflow Weir Plate                     Electricity and                    Hand Rail and Walkway                                                                                                                  Controlling Device                      GB 4053.3-2009 Carbon Steel surface finish and corrosion treatment   1. Sand Blasting/ Shot Peening, ISO Sa≥2.5,epoxy Zinc Rich Primer, 50μm/coat. 
  2. Internal: a) Epoxy Zinc-rich Primer, 50μm/coat×1; 
                     b) Epoxy Mastic Paint, 100μm/coat×2~3;
                     c) Total film thickness: ≥250μm.                                                                       
  3. External: a) Epoxy Zinc-rich Primer, 50μm/coat×1; 
                     b) Epoxy Micaceous Iron Intermediate Paint, 50μm/coat×1;
                     c) Polyurethane Finish, 50μm/coat×1; 
                     d) Total film thickness: ≥150μm.   Spraying Method: High-Pressure Airless Spraying   Device Color: Light Sea Blue (PANTONE No.RAL5015),or according to customers’ demands.      Standards for Interface Flange   China: JB/T81-1994, PN 1.0   America: ANSI  150    Japan: JIS 10K    Optional inclusions for LST2-020

No	Category	Desription
1	Tank Material	SUS304, SUS316, Duplex Stainless Steel
2	Pipe material	Q235B Line with Rubber, PVC, SUS304, SUS316,  Duplex Stainless Steel
3	Pump brand	CNP, GSD PUMP
4	Protection grade of electric equipment	according to circumstances, even for IP55
5	Explosion-proof	if required

  Our Services 1. Detailed installation manual and maintenance guideline are provided with the equipment. 2. Technical training and site-commissioning are available for you. 3. Any equipment issue, we will stand by. However, the visa fee, air tickets, accommodation, wages will be paid by buyers.        Company Information Company: Jorsun Environment Co., Ltd Contact: Aileen Yin Skype: aileen.yin4 Tel:+86-21-20243658 Web: www.jorsun.com Address: 5F, Jintai Building No.1398, Xinjinqiao Road, Pudong, Shanghai, 201206     As a specialized water purification manufacturer in China, Shanghai Jorsun Environmental Engineering  Co. ,Ltd with own manufacturing plant is capable of manufacturing thousands pieces of equipments annually, among which over 200 are Lamella devices.   Jorsun’s Lamella equipment is suitable for water purification in many industries, including electroplating wastewater, pulp and paper wastewater, industrial wastewater, mining, filtration pretreatment, river purification, sludge thickening, etc. As of 2013, we have provided water purification solutions for over 200 business customers in more than 30 countries worldwide.     FAQ   1. How to buy your idea products?  A:You can provide us your water sources, water quality, flow rate and ground area (connect us for more details). 2. How to pay? A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT. 3. What is the delivery time? A: It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks. 4. How to pack the products? A: We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers. 5. How to keep your equipments from corrosion?  A: We use the world-famous paint, like SigmaCoatings,PainBow,etc. What's more, we paint strictly according to the standard process. 6. How do you manufacture your equipment ? A:Our  machining technology  includes laser/plasma cutting, automatic welding,CNC cutting and bending. 7. How to install after the equipments arriving destination? A: We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee, air tickets, accommodation, wages will be paid by buyers.