Product description
1. Equipment Name and model
YHWP-7026-S Cylinder battery semi-automatic winding machine
This machine is mainly used for the precision winding of prismatic power battery. The work process is as follows: Leading the anode and cathode electrode into the winding area with manual, joining with the separator and stacking, then winding according to the process requirements, automatically adhering terminated tape and auto-blanking for jelly roll.
2, Equipment characteristic
A. Single winding core and taking out winding needle from both side structures.
B. Feeding the electrode flakes manually, automatic winding, automatic replacing the needle, automatic adhere the glue tape and automatic output the finished cell core;
C. Active unreeling of two rolls of separator, with adjustable constant tensile force;
D. The software can be set as "Cathode Feeding First", "Anode Feeding First" or "Both Feeding".
E. Can wind the electrode with length of 1800mm. (Core Dia. Is no more than 26mm)
F. Electrode feeding with manual, tension is steady.
G. Winding speed is steady, tension of core is steady.;
3, Technology Index
A. The dia. Of winding needle: φ 4(standard), φ 3.5;
B. Separator width: 30 ~ 60 mm;
C. Electrode Width: 33 ~60 mm;
D. Electrode length: 300 ~1500 mm;
E. Winding Dia.: φ 14-26 mm;
F. Separator Dia.: φ 76 mm(3inch), Max Dia.: φ 250 mm;
G. The width of terminated tape: 10 ~ 40 mm;
H. Terminated tape circle: 0.2-1.5 circle
I. Tension of separator is adjustable.
J. Tension of cathode and anode electrode: Adopting VAC-sorb way.
K. Winding precision: The error for separator and Anode, Anode and cathode less than ± 0.5 mm; (length of electrode less than 500mm).
P. S.: Width of electrode error < ± 0.1mm;
Electrode's "S" bending error <± 0.2mm/500mm;
Separator turriform error<± 0.2mm
L. Equipment capacity: 6 PPM; (Electrode length<800mm).
M. FTY>98%
4. Equipment Main Parts:
A. Separator Unreeling System (2 Sets): Separator unreeling unit, tension unit, transiting wheel, etc.
B. Electrodes Guiding System (2 sets): Guiding board, pinch roller and vacuum system.
C. Winding System (1set): Single needle inserting, winding by needles of both sides.
D. Working Station Conversion system (1set): Working station conversion, clamping separator unit, cutting separator unit, etc.
E: Glue Sticking System (1 set): Pneumatic glue feeding unit, glue pressing unit, glue cutting unit, etc.
F. Output System (1 set): Rolling-over way.
G. Controlling System (1set): Electric controlling cabinet, electromagnetic valve, control cabinet, etc.
5, Accessory Facility:
A. Space: 2000 mm(L)× 1500mm(D)× 1700mm(H);
B. Power: 220 VAC± 5, single-phase, 2 KW;
C. Air source: 5~7 kgf/c, 100 l/min;
D. No causticity gas, liquid and burst gas
Any more question, please contact me:
86-13573923587
Melody at libgroup. Net