Sectional Vulcanizing Press for Belt Conveyor

Sectional Vulcanizing Press for Belt Conveyor

Conveyor belt vulcanizer is used to repair and splice conveyor belt, such as EP conveyor belt, rubber conveyor belt ,Nylon conveyor belt and Steel cord conveyor belt etc.

Arphu sectional vulcanizing press is widely used for belt conveyors of port, mine, milling factory, power plant, cement company., etc.

The SVP conveyor belt vulcanizer is the ideal choice for heavyweight sectional vulcanizing presses. SVP vulcanizing press is light in weight and flexible in size, making it suitable for splicing textile core conveyor belts and steel cord belts. It can be easily disassembled for transport and maneuvering, even in cramped or distant areas. The lightweight components are easy to assemble. The modular design allows users to extend the splice length or belt width by adding another section.

Features of Arphu sectional vulcanizing press 

Flexible sizing
Portability to the field site
A variety of bar styles to match your splice needs
Innovative "Pressure Bag" uniform pressure system
Quick water cooling system within platens
Durable heating system, custom designed to voltage phase and cycle
Accurate temperature control and indication
Operating pressures of 0.7-1.5 MPa (100 psi to 220 psi)
Customized bias and rectangular splice configurations
 

Main Technical Parameters
1. Working Pressure: 0.7-1.5 MPa (100 psi to 220 psi) and custom design for your special need;
2. Vulcanization temperature: 145°C or as per actual requirement;
3. Difference in surface temperature of vulcanized plate: ± 3°C;
4. Heating up time ( from normal temperature to 145°C )<30 minutes;
5. Voltage: 220V/ 380V/415V/440V/480V/550V/660V, 50/60Hz; custom designed to voltage phase and cycle;
6. Temperature Controller adjustment range: 0 to 199°C;
7. Timer adjustment range: 0 to 99 minutes.

HEATING PLATENS

· Each sectional press is constructed with aluminum flexible platens that contour to the conveyor belt surface during splicing;

· Platens are individually designed and include BUILT-IN cooling system, and BUILT-IN temperature sensor;

· Sturdy and shock-proof plug and sockets to enhance vulcanizing press durability.

CROSS BARS

· Bars are available in various profiles and lengths and height to provide a custom solution for your needs;

· Bars are specially designed by aviation aluminum alloy and manufactured out of quality extruded aluminum alloy;

· Various bolt and nut styles complement each bar type and provide a secure, pressurized splice.

PRESSURE/COOLING

· Pneumatic or water pressure up to 1.5 MPa or 220 psi;

· Cooling time within 10 mins from 145 ° C to 60°C.

SUITABLE PUMPS: 

·  Manual pump and Electric pump for your prefered choosen

· The pumps include gauges for fluid level and pressure

· Extra reservoirs can be easily added for larger presses  

  Cooling options are also available.