Schwing Pumping cylinder DN200x1600/ Schwing concrete pump cyliner for conveying Supply directly from the manufacturer!! Schwing Pumping cylinder DN200x1600/ Schwing concrete pump cyliner for conveying Specification Single Wall Elbow-Metric Type
Degree of Angle | ID(in/mm) | Model | Ends |
15 | 4.8’’(125mm) | DN125*R275*15D | Metric |
30 | 4.8’’(125mm) | DN125*R275*30D | Metric |
32.5 | 4.8’’(125mm) | DN125*R275*32.5D | Metric |
45 | 4.8’’(125mm) | DN125*R275*45D | Metric |
90 | 4.8’’(125mm) | DN125*R275*45D | Metric |
Single Wall Elbow-HD Typ
Degree of Angle | ID(in/mm) | Model | Ends |
90 | 4.8’’(125mm) | DN125*R275*90D | HD |
90 | 4’’(102mm) | DN100*R275*30D | HD/Metric |
90 | 4.8’’(125mm) | DN125*R180*90D | HD/Metric |
90 | 4’’(102mm) | DN125*R180*90D | HD |
Reducing Elbow
Model | Ends |
5" x 3" 90 degree | HD-HD |
4" x 3" 90 degree | HD-HD |
5" x 4" 90 degree | M-HD |
5" x 4" 90 | HD-HD |
5" x 3" 90 degree | M-HD |
PM 7" x 6" | |
Two Wall Elbow
Model | Ends |
5" X R275 X15D | chrome carbide insert |
5" X R275 X30D | chrome carbide insert |
5" X R275 X45D | chrome carbide insert |
5" X R275 X90D | chrome carbide insert |
Product Description 1.product profile:The double layer concrete pump elbow is developed by ourselves through new technology and process. 2.characteristic:the inner layer of this concrete pump elbow undergoes heat treatment,and then the rigitiry can reach 62-65HRC. 3.characteristic:the outer layer of the concrete pump elbow possess good toughness properties to protect the inner layer,so the security of the elbow is improved. 4.life:the experiment done abroad shows that the life of our concrete pump elbow can reach 35000-50000cbm,got the customers' praise 5.Beside the double layer concrete pump elbow,we produce all kinds of concrete pump parts, straight pipe hose flange coupling and so on.
Wear-resistant Single or Double Concrete Pump Elbow |
Type | Singe Elbow | Double Elbow |
Model | DN125 | DN150 | DN175 | DN125 |
Material | Casting Steel ,ST52 | Inside | 40Cr | Outside |
Size | R275*90° | R275*90°+110 | 36° | F2000 | R275*90° | R275*90°+110 |
R275*45° | R275*90°+211 | R400*30° | A3000 | R275*45° | R275*90°+211 |
R275*25° | R275*90°+411 | R400*45° | 471B | R275*25° | R275*90°+411 |
R275*20° | R275*90°+424 | R400*30° | 571B | R275*20° | R275*90°+424 |
R275*15° | R275*45°+170 | R488*90° | A1000 | R275*15° | R275*45°+170 |
R180*90° | R275*45°+310 | R500*90 | C1000 | R180*90° | R275*45°+310 |
R232*60° | R275*45°+310 | R280*90° | B2000 | R232*60° | R275*45°+310 |
R240*36° | 20°Lengthen | | | R240*36° | 20°Lengthen |
R240*30° | 25°+740 | | | R240*30° | 25°+740 |
R240*15° | 40°Zoomlion | | | R240*15° | 40°Zoomlion |
R385*29° | | | | R385*29° | |
R315*33° | | | | R315*33° | |
Technic | Forged | |
Average life | 25,000cubic | 50,000cubic |
Appliciation | Used in concrete transport in construction work
|
Company Information Zhuzhou Jian Da Co.,Ltd is specialized in R&D, production and sales of concrete pump wear parts with high hardness and wear resistance. Our products include tungsten carbide wear plates & wear rings, S valve, pipes, elbows, and other related parts. We can produce the wear parts for most trailer concrete pumps, boom pumps, and shotcrete pumps in the world, fitted to brand of Putzmeister, Schwing, Sany, Zoomlion, Kyokuto, Sermac, Cifa, Mitsubishi, IHI, Niigata, Kcp, Junjin, Jacon etc.
We offer a wide variety of concrete parts and accessories to help finish your concrete pumping job or for your specific pump need, with top quality, technical sales and service support for over 10 years.
Whatever you need for concrete pumping, we've got you covered.
S Transfer Valve
Wearing Plate and cutting ring
Related spare parts for Concrete pumps
Factory and Production Line