SA Tile glue, tile adhesive, tile fixing adhesive

  Company Information   Shanghai ShunAn Gruop was established in 2004, located in Shanghai wanxiang industrial park near A30 Exit of Shanghai Highway. It is a integrated enterprise involved with R&D, Production, Sales and Construction, which is made up of 2 branches, ShunAn Building Materials Co., Ltd, ShunAn Construction Engineer Co., Ltd, totally covering over 10,000m2.
We have a large group of Professional technicians,researchers and administrators, with strong Rearch Development, Marketing and scaled production capacity. ShunAn Group is equipped with the international top-level production lines,annually producing 50,000 tons technical mortar and singal items, 150,000 m3 insulation materials, widely used in home building,public works,ect.   ShunAn has been approved by ISO 9001 and set up regular business relations with Wanke, Hengda, Shanghai Jiangong, and some other famous property developers with our high quality and comprehensive service.                                        Product Description SA-812--Ceramic Tile adhesive adhesive
Product Description
Shunan Ceramic Tile adhesive SA812 is a polymer modified cement based adhesion material.
Ideal for all kinds of ceramic wall tiles and floor tiles with wide gap.
Scope of Use
1. Can be used on substrates that ready for coating and non-shringking: concrete, cement
plaster, concrete panel, and brickwork with plaster directly
2. Can be used for water absoption less than 0.5%,Ceramic tile size (≤300*600) mm on the
interior wall.
Substrate Preparation
1.Substrate must be even, sound, clean, free of dust, grease, waxiness or release agent which
may cause separation.
2.Appearance coating should be cleaned, and the area of coating residue should be less than
20%.
3.Fresh concrete substrate can be tiled at age of 28 days, Fresh plaster substrate can be tiled
at the age of 7days.
4.Old concrete and plaster substrate should be tiled after being cleaned by industrial detergent,
washed by high pressure tap and dried in the air for 24 hours.
5.Substrate should be coating with Interface agent if Impregnate concrete with high coefficient
of water absorption or dust is hard to remove.
6.Substrate should be wet inside and dry outside before construction in such conditions: high
temperature, dry conditions, high coefficient of water absorption.    
Construction Methods
1. Pour clean water into a mixing container by water/powder proportion of 1:4, before adding
ceramic tile adhesive SA-812 slowly . Meantime, open agitator and start mixing evenly from top to
bottom until completely free of lumps. Allow the mixture to nature for short time. Then mix again
slightly before using.
2. Use a flat scraper to spread a layer of adhesive onto the whole substrate surface, then use
suitable tooth side of scrape in the angle of 69°with the substrate to draw stripes in straight
direction and then fix ceramic tile on.
3. It should be double-sided if fissure on the back of ceramic tile is too deep or the stone
( ceramic tile) is too big and heavy. Namely, both construction and substrate surface should be
spread with adhesive.
Notes
1. The construction temperature: 5-35℃
2. The ratio of water and material can be adjusted appropriately according to substrate
materials, weather, construction conditions, ect.
3. Well mixed adhesive should be used out within 2-3 hours , It should be abandoned instead
of being recycled after mixing with water when appearing indurated .
4.There should be protection measures during rainy days. Make sure the construction area
can not get wet within 24 hours after construction.
5.Temporary fixation measures should be taken when fixing tiles.    
Reference dosage:
Under the condition of the formation on the surface of the base, theoretical dosage is about:
3.5-7 kg/m 2 . The specific amount varies depending on the base level and brick
Shelf life:
Unopened product is stored in a dry, cool, ventilated place, shelf life is one year.
Execution standard:
JC \ T547-2005 "ceramic tile adhesive "             Packaging & Shipping Packing: 20kg/25kg Per bag.  2 Tons Per pallet 25 Tons Per container Shipping: By sea or By air               Our Services Main Products:   Technical mortar, Decoration mortar, Heat insulation mortar, and waterproof paint. We also provide Professonal exterior heat insulation construction and service, annuel turnover can be up to 2000,000m2/year, and it has been increasing by the speed of 100% in the past 5 years. Through our efforts, we have become famous exterior wall heat insulation systerm provider in Yangtze River Delta. ShunAn has been approved by ISO 9001 and set up regular business relations with Wanke, Hengda, Shanghai Jiangong, and some other famous property developers with our high quality and comprehensive service.       Contact Us Contact us              Free Hotline 400-824-0086 021-58041299            0086 18721367270           claire.bai2        0086 18721367270      Web.  www.shunan51.com