Rolling shutter door roll forming machine 

Product Destription

TheGarage Shutter Doors Making Machine can manufacture the galvanised roller shutter door slat. Produced products are in fashionable design and are widely used.Roll Shutter Door Slat Roll Forming Machine with the highest security in rolling fire doors, rolling steel doors, fire doors, rolling shutter, offshore rolling doors, offshore rolling fire doors, storm doors.

Quickly informations:

1.Control system:computer control

2.Main forming unit driving motor power:5.5kw

3.Material of rollers:45#steel,quenched HRC58-62,coated with rigid chrome.

4.Material of roller shafts:45#steel

5.Step of rollers:14steps

6.Forming speed:10-15m/min

7.Thickness to be rolled:0.5-1.5mm

Components of Line

1. Decoiler

Usage: It is used to support the steel coil and uncoil it in a turntable way.

Passive uncoil pulled by roll forming system

a. Coil inner diameter: 450-550mm

b. Coil max width: 300mm
c. Max carrying capacity: 3000kg

(you can choose this part with Electric or hydraulic)

2. Entry leveling and punching dots

This part will level coil to make sure it is neat clean and straight.

3. Roll forming machine

a. Number of forming steps: 14 stations

b. Shaft material: 45# steel with quenched treatment, precision machined,

The diameter: ￠56mm

c. Roller material: bearing steel with quenched treatment

d. Transport: by gear

e. Forming speed: 10-15m/min
f. Motor:5.5kw

g.Voltage:380v, 50Hz,3 phase

h. Structure: independent stand

4. Shearing system

The material of blade: Cr12Mov, Hardening HRC 58-62℃

Length Tolerance:3m±1.5mm

5. Hydraulic station

Hydraulic motor Power: 3kw

Hydraulic oil: 46#

Hydraulic pressure : 12Mpa

6. PLC station

PLC control system, we will take Panasonic or you can specify the one you like. Different with normal machine, PLC programmed will add servo cutting saw control parameters.

7. Run out table

It adopts welded steel and supported roller to transmit the products.

1.Processing flow diagram of machine

Manual decoiler→ Feeding material into machine →Roll forming machine →Measure length →Punch the lock holes→Hydraulic cutting →Finished Products

2. Technical parameters

Material	Raw material	Galvanized
	Thickness	0.8mm
Manual decoiler	Inner Diameter:450-550mm	Expand by manual
	Outer Diameter: max 1500mm
	Max Coil width:300mm
	Capacity: 1.5T
Main Forming machine	Forming steps	12 rollers
	Shaft diameter	50mm
	Design type	Middle plate
	Machine frame	Memorial arch
	roller material	GCr12MoV steel
	shaft material	45# steel with tempering
	Work speed	0-12m/min
	Transport	By gear
	Power of main machine	5.5kw
	Type of cutting	Hydraulic
	Cutting tolerance	±1mm
	Cutter	Gcr12
	Punch mould	Gcr12
	Working pressure	20MPA
Hydraulic system	Hydraulic oil	46#
	Hydraulic power	4kw
	Cutting length	As required
	No distorting or wasting. High level safety factor.
Control Device	control		By PLC
	PLC language		English and Chinese (or as required)
	Touch screen		Delta
	Function		Automatic length and quantity measurement
Other Spare part	Weight		About 3.8 ton
	Dimension		5200*800*1400 (mm) L x W x H
	Main body color		Main body color
	Voltage		380v/50hz/3ph(or as required)