Rock wool panel equipment EPS sandwich panel production line

Specifications 1.Roll speed:8-10m/min

2.Frame:300H steel welding

3.PLC control system

4.Good quality and best service

5.Customize

  EPS Roof and Wall Sheet Color Steel Sandwich Panel Line   Insulated Sandwich panel production line making thick pre-formed color steel coil stick on the both side of core, which forms a new style building materials. The core materials can be rock wool, glass wool, rigid PU, PIR, EPS, XPS, phenolic foam. This building material has some excellent features, such as high-strength, light weight and heat insulation and so on. It is widely applied on wall and roof of light steel structure buildings. The product is with bright color and does not need a second-decoration.   Technical parameter:

Description	specification
Main moter power	32kw
Out line dimension of machine	33m*2.5*2.5*
Total weight	10t
Processing speed	0-5m/min
The thickness of upper steel plate	0.3-0.8mm
The feeding width of upper steel plate	1000/1200/1250
The thickness of lower steel plate	0.3-0.8mm
The feeding width of upper steel plate	1000/1200/1250
material	EPS
thickness	38-298mm
The width of stocket board	950/1150mm
The width of H board	1000/1200mm
Equipment parts: including roll forming system, PLC control system, hydraulic cutting system, , products supporter, counter

  Maintenance of roll forming machine For a roll forming machine, good maintenance is a crucial element to improve machine working efficiency and extend its service life. Following are some tips on machine maintenance:

Filter 1 each oil change, filters should be replaced or thoroughly cleaned;
2 air filter of the fuel tank should be checked and cleaned every three months better to be replaced each year.
3 when there is alarm or oil filter is not clean, filter should be replaced;

Hydraulic components 1 Hydraulic system should be cleaned each month, (including the base board, valve, motor, pump and oil pipe.) to keep dust off, but detergent should not be used.
2 When the new machine has been used for one month, user should check possible deformation of oil pipe and replace the deformed one. When used for two month, all connections of components should be tightened and this should be done after the machine is turn off and there is no system pressure.   Hydraulic oil 1 oil level should be checked each week or after repair of hydraulic system. Fill in the hydraulic oil once oil level is below the oil window
2 oil temperature should be between 35 °C ~ 60 °C, shall not exceed 70 °C,if the oil temperature is too high it will lead to deterioration and damage of accessories.
3 new machine oil change should be conducted after 2000 hours usage, after that, every 4000 ~ 6000 hours of work should change oil, Oil tank should be washed every time oil is changed.               Working Shop     Company Profile     Machine Loading     Other Machinery     Certificate