Led driver Desc Reliable MeanWell LCM-40DA 350mA DALI dimmable 40W LED Driver
LCM Series led driver Features: 1. Bulit-in active PFC function
2. Constant Current mode output wit hmultiplelevels selectable by dip switch
3. Standby power consumption <0.5W
4. Plastic housing with class II design
5. Functions: 3 in 1 dimming (dim-to-off); synchronization up to 10 units
6. 3 years warranty LCM series led driver is a single unit supplies multiple current levels,350mA/500mA/600mA/700mA/900mA/1050mA. The current levels are able to be easily switched by adjusting the built-in switch. LCM switching power supply also provide the dimming function that is controlled by external 0-10VDC or PWM signal or resistance. Moreover, the synchronization design allows the dimming for up to 10 units of LCM led driver to be controlled. Differentiating from general DC output power suppliers, LCM series power supply built-in DALI interface and push dimming function for LCM-25DA/40DA/60DA, multiple-stage C.C. level selectable by DIP switch.
Once you’re found an Mean well LED driver, Kulon Electronics will make your Mean well placing order easy. These LED drivers suitable for indoor LED lighting, office LED lighting and LED decorative lighting. “Total quality assurance and customer satisfaction” are the central goals of our company.
Led driver Paramet
MODEL | |
| CURRENT LEVEL | 350mA | | | 700mA | | |
Current level selectable via DIP switch, please refer to”DIP SWITCH TABLE” section |
| 42W |
| | | 2 ~ 67V | 2 ~ 57V | | |
OPEN CIRCUIT VOLTAGE (max.) | 110V | 65V |
CURRENT RIPPLE | 5.0% max. @rated current |
CURRENT TOLERANCE | ±5% |
SETUP TIME | 500ms / 230VAC |
| VOLTAGE RANGE | 180 ~ 295VAC 254 ~ 417VDC |
FREQUENCY RANGE | 47 ~ 63Hz |
EFFICIENCY | 91% |
AC CURRENT | |
LEAKAGE CURRENT | <0.5mA / 240VAC |
MODEL | |
| SHORT CIRCUIT | Constant current limiting, recovers automatically after fault condition is removed |
OVER TEMPERATURE | Shut down o/p voltage, recovers automatically after temperature goes down |
| 110 ~ 130V |
Shutdown o/p voltage, re-power on to recover |
| WORKING TEMP. | -30 ~ +90 ℃ (Please refer to Derating Curve section) |
WORKING HUMIDITY | 20 ~ 90% RH non-condensing |
STORAGE TEMP., HUMIDITY | -40 ~ +80 , 10 ~ 95% RH |
TEMP. COEFFICIENT | ±0.03% ℃ / (0 ~ 50 ℃ ) |
VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes |
| SAFETY STANDARDS | UL8750, CSA C22.2 NO.250.0-08, ENEC EN61347-1, EN61347-2-13, EN62384 independent,GB19510.14,GB19510.1 approved |
WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC |
ISOLATION RESISTANCE | I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH |
EMC EMISSION | Compliance to EN55015, EN61000-3-2 Class C( 50% load) ; EN61000-3-3; GB17625.1,GB17743 |
EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61547 light industry level (surge 2KV), criteria A |
LED Driver Certify
Led Driver APP LCM series led driver is suitable for : 1. LED indoor lighting 2. LED office lighting 3. LED architectural lighting 4. LED panel lighting
Packing&Delivery Reliable MeanWell LCM-40DA 350mA DALI dimmable 40W LED Driver
Related Led driver
LCM Series led driver
LCM Series led driver LCM Series led driver
HLG Series led driver HBG Series led driver APV Series led driver FAQ How do you select suitable MW LED power supply?
1. Select suitable wattage based on customer’s system requirements and application methods. Must also take excess power and driving method into consideration.
For selection key points when using MW power supply to “directly” drive LED lamp refer to questions (2) and (3).
For selection key points when using MW power supply in combination with LED driver IC to achieve high precision current control refer to questions (2) and (3).
2. Based on LED power supply’s operating environment select suitable IP level and mechanical type (metal enclosure, plastic enclosure, and open frame PCB) for that environment.
3. Is PFC function required or not? Single stage PFC is only suitable for LED load. Dual stage PFC is suitable for general applications.
4. If LED system is based on direct drive, units with adjustable voltage and current should be considered for flexibility in changing voltage/current levels. Dimming function may also come in handy when LED brightness control is preferred.
Contact us Mr. Kobe Ding: Meanwell power supply Products Consultant
Hangzhou Kulon Electronics Co.,Ltd.
Add: 6F, 3 Bld, Holley Nova Park, Liansheng Road, Wuchang Street, Yuhang District, Hangzhou, China
Tel: 0086 571 8500 3730 / 8500 3733 Fax: 0086 571 8500 3737 QQ: 2853053270
Skype: sales39.kulon Website: www.kulon.com