raymond pendulum corse powder mill

Specifications corse powder mill

1.23~180 microns

2. durable wearing parts

3. ISO9001:2008

4. Quick feedback for inquiry

GUIKUANG is the first raymond mill manufacturer and one of largest production base since 1973.    raymond pendulum corse powder mill

    1. Brief Intruduction:       Brief Introduction Raymond  grinding mill is mainly used in  chemical industry such  as grinding  glass, rubber,   pesticides, enamel,  paint,  phosphate fertilizer, paper.  Hardness below  seven  Moh’s  hardness   following    humidity below   6%  non-flammable and   explosive  materials.Such as: talc, barite,  calcite, limestone, manganese oreiron ore ,   chrome ore, quartz, gypsum, bentonite,   etc, below are some material in application:    
2. Technical Advantages:   Benefits&Advantages 1. High Output & Low Consumption -- Compared with same capacity φ1250 vertical mill, one quarter power saving; Compared with normal Raymond mill, same with total outlet of 6 pcs 4R3216,one quarter power saving.
2. Less Floor Space -- Floor Space:153 sq.m. Compared with same output and granularity, one third floor space saving than  6 pcs 4R3216 Raymond mills( 1 pc takes 56 sq.m) So GK1720 will reduce investment in infrastructure.
3. Large Transmission Capacity -- Blower adopts high pressure centrifugal fan to increase air volume and air pressure, so as to greatly improve the ability of pneumatic conveying.
4. High Collection Efficiency -- Cyclone collector adopts parallel double cyclone collector, 10-15% higher than the single cyclone collection efficiency.
5. High Classification Accuracy -- Classifier adopts built-in large taper blade turbine classifier. The outlet fineness can be adjustable from 80-600 mesh.
6. Strong ability of shoveling material  --  Adopting super large shovel blade to shovel as much as possible to the grinding area between the roll and ring.
7. Energy-conservation and Environment-protection --  Equipped with pulse dust collector in surplus wind outlet, collection efficiency is as high as 99.9% to keep workshop environmental health.       3. Main Technical Parameters:     Technical Parameters 1. Host-main unit
(1) Max feed size                                                                                          35mm
(2) Finished Size                                                                                            80-- 600 mesh
(3) Output (based on different raw material fineness)                      6- 25t/h
(4) Central axis rotating speed                                                                    88 r/min
(5) Grinding ring inner diameter(ID×Height)                                            Φ1720 x 250mm
(6) Grinding roller size(OD×Height)                                                            Φ510×250mm
2. Classifier
Turbine grading impeller diameter                                                             Φ1315mm
3. Air Blower
(1) Wind volume                                                                                             75000m3/h
(2) Wind pressure                                                                                           3550Pa
(3) Blower fan rotating speed                                                                      1600r/min
4. Bucket Elevator
Lifting height                                                                                                    7200mm
5. Type GZI Electromagnetic Vibrating Feeder
(1) Power                                                                                                          200w
(2) Feeding capability                                                                                     25t/h
6. PE-250×400 Jaw Crusher
(1).Inlet size(width*length)                                                                        350mm×750mm
(2) Outlet size( width)                                                                                    15mm~50mm
7. Overall Unit
(1) Dimensions after installation (L × W × H)                                             12500mm×12250mm×10430mm
(2) Total weight                                                                                               46t
(3) The total power                                                                                         403.2kw       4. Production Process     Production Process Grinding Process of Main Unit: The motor’s power is driven to the decelerator’s output torque, by way of the coupler, drives the center shaft’s plum-shape holder to make a circumference revolution. In the mean while, the rollers rotate due to their mutual friction. And caused by the centrifugal force, these rollers sway outward, pressing the ring tightly. In the course of its turning around, the shovel blade, which is fixed at the intersect for the lower part of the holder and the roll, shovels the ore to the point between the roll and the link, forming an ore-cushion coat. As the rolls keep on rolling, crush and pulverization are thus completed.
       5. Details Decide Quality     Details Make Quality   (1) Jaw Crusher  a. The body shell is whole casting by our own foundry. Much more stable than welding shell.  b. Thickened shell gets longer service life. 3, Simple and reasonable structure Note: some jaw crusher from other supplier  is welded with seperate pieces. This makes the structure less compact.   (2) Foundation Bolt  The long foundation bolt can reduce vibration and make the machine more stable when then machine is  running, thereby it will prolong service life. Note: some supplier adopts expansion screw insead of the foundation bolt. This increases the vibration during the machine is running.  (3) Large Base of Main Unit    a. Large base makes the machine more stable during running.    b. The design of tangential airflow inlet make the airflow from air blower into the chamber more easier.The design  take full advantage of the airflow and save energy  consumption.   Note: some supplier only weld some steel onto the inside wall of main unit. This reduces the price but weaks the stability and performance of the mill.    (4) All shafts    Central Axis is core component for each machine,we have strict quality control for this:   a. First step --The central axis will be preliminarily rough machined by lathe   b. Second step -- Heat Treatment Quench and elimit its internal stress to make the central axis more tenacious and stable   c. Third step -- Finsh turning   d. Last step -- To mill bearing position by grinder    Note: in order to reduce cost, some supplier would not to take the above full steps.      6. Workshop & Warehouse     Workshop & Warehouse Being  an   ISO 9001 : 2008  certified  unit,    systems    and procedures  are   well   defined  and  monitored  closely  at   all  stages of the production process.       7.Installation Sites       Installation Sites Since 1973, more than 8000 grinding mills have been installed in domestic and overseas regions:       8. All Kinds of Models for Different Requirement:    More Models There are more models to meet users'  different capacity requirement: Note:  1.The specifications in the above file are for reference only. We reserve  the right to modify or change them as required. 2. The above capacity is based on limestoe    9. Technical Service:    (1) Free design for the production line flow chart diagram according to the site. (2) Provide technical parameters of auxiliary equipment. (4)  if buyers need to adjust the layout, free technical support is available. (5)  During running period, if buyers want to update the equipments, only cost is charged.     10.After-sale Services: (1) Engineers are available to send to assist installing and debugging the equipment. (2) The warranty period is 1 year since the machine is debugged into operating. (3) High quality spare parts are provided with reasonable price. After the guarantee period, only cost is charged for repairing the equipment.      11.Transporting & Loading:    12.Contacts: