Rail-type cargo lift warehouse electric guide Rail-type lift CE PROVED Rail-type cargo lift
1. chain features lifting goods
2. hydraulic driven and lift by chain
3. Lifting high 5m
Advantages on Foundation: Engine room can be set within 15m around the lift, only occupies 3-4 m2.
Hydraulic lift has no counterpoise device which make more space for the lift..
The loading of the lift is afforded by the foundation, if the cargo is not heavy enough, brick or brick & concrete is OK.
Advantage on safety and stability: Besides the safe devices on normal elevator, there are still:
Overfall valve: To avoid over loading when it is moving up.
Emergency manual valve: In case power off, the lift car may drop to the nearest layer to open the door.
Manual pump: When failure occurs, operator may use manual pump to give high pressure oil to get to the nearest layer.
Pipe broken protection valve: When lifting car drops fast as oil pipe broken, use the valve can make the lift stop dropping.
Oil temperature protection: When temperature of oil is overheat, there is signal given out, stop the lift when temperature get normal, start again. Operation cost advantages:
Low failure rate: Because of the advanced hydraulic system and perfect control method, the failure rate has been to minimum.
Low power cost: When lift drops, self-weight makes big driving force so that save a lot of energy. Part of our products parameters:
Specification | Vertical travel (mm) | Lowered Height (mm) | Capacity (kg) | Platform size (L*W, mm) | Power (Kw) |
SJD0.3-4.5 (2 layers) | 4500 | 150 | 300 | 1000×800 | 1.5 |
SJD0.5-4.5 (2 layers) | 4500 | 150 | 500 | 1500×1000 | 1.5 |
SJD1.0-4.5 (2 layers) | 4500 | 150 | 1000 | 1500×1500 | 2.2 |
SJD2.0-4.5 (2 layers) | 4500 | 150 | 2000 | 2000×1000 | 2.2 |
SJD3.0-4.5 (2 layers) | 4500 | 160 | 3000 | 2000×1200 | 3.0 |
SJD0.3-7.5 (3 layers) | 7500 | 150 | 300 | 1000×1000 | 1.5 |
SJD0.5-7.5 (3 layers) | 7500 | 150 | 500 | 1200×1200 | 1.5 |
SJD1.0-7.5 (3 layers) | 7500 | 150 | 1000 | 1800×1400 | 2.2 |
SJD2.0-7.5 (3 layers) | 7500 | 150 | 2000 | 2000×1500 | 2.2 |
SJD3.0-7.5 (3 layers) | 7500 | 160 | 3000 | 2000×1600 | 3.0 |
SJD1.0-10.5 (4 layers) | 10500 | 150 | 1000 | 1800×1400 | 2.2 |
SJD1.0-14 (5 layers) | 14000 | 150 | 1000 | 1800×1500 | 2.2 |
SJD3.0-4.5 (Special for lifting cars) | 4500 | 160 | 3000 | 5000×3000 | 4.0 |
Guide rail hydraulic lifting platform is a kind of non-scissors lift, which is used to transfer cargo between layers in workshop, restaurant and hotel. Because the lowered height of the table is only 150-200mm, it is used in the site where is no, and with 4 modes, (Single post, double posts, 4 posts), the movement is clam, the operation is simple and reliable; hydraulic and electric drive make cargo transfer more easy and economic. (Detailed capacity and travel height can be designed according to customer’s requests.) We, Dalian Mingcheng Industry Co., Ltd., will do the best to make the effective cargo transfer platform, there are devices for avoiding falling down, mutual-lock between upper and nether gates, there is control button in every layer and the platform, to control the lift in multi-point control. The product is designed and made in a strong structure, which makes the lift a bigger capacity, more stable performance, better safety and easier operation, which is the idealest substitution of elevator for transfer cargoes. According to different surroundings, customers can select different collocation, which make the performance better. Maximum capacity is 15t, multi-point control, mutual-lock between upper and nether layers, so to make a safer operation. The lift height of the equipment is high, side mounted or double side mounted cylinder makes the operation more reliable, no noise, a longer service life and an easy maintenance. Electric and manual drop, emergent stop button is convenient and safe. It is suitable for 2-6 layers’ steel structure workshop, and can be used inside or outside of the workshop. The pump is imported, if it is requested a higher speed, the pump can be special made. Cylinder and seal parts are all imported to solve the problem of unstable of oil pressure and leaking oil. Contact Us!
Sales Manager: Jane Xu
Dalian Mingcheng Industry Co.,Ltd. | MOB 0086-13322202758 |
Office Tel 0086-411-82767451 | E-MAIL jane @ mingchenggroup.com |
Office Fax 0086-411-82766117 | G-MAIL mcxuqinjane @ gmail.com |
Website mcmachine.en.alibaba.com | SKYPE jane.xu94 |
www.mciplatform.com | MSN xuqinjane @ gmail.com |
www.mingchenggroup.com | YAHOO xuqinjane @ yahoo.com
|