Quality open frame high brightness lcd monitor G190ETN02 support the SXGA Discription G190ETNO2.0 is a Color Active Matrix Liquid Crystal Display composed of a TFT-LCD panel, a driver circuit,and a backlight system. The screen format is intended to support the SXGA(1280H*1024V) screen and 16.7M colors(RGB 6-bits + HiFRC data).All input signals are dual channel LVDS interface
Handling precautions 1 Since front polarizer is easily damaged,please be cautious and not to scratch it 2 Be sure to turn off power supply when inserting or disconnecting from input connector 3 Wipe off water drop immediately.Long contact with water may cause discoloration or spots 4 When the panel surface is soiled,wipe it with absorbent cotton or soft cloth 5 Since the panel is made of glass,it may be broken or cracked if dropped or bumped on hard surface 6 To avoid ESD(Electro Static Discharde)damage, be sure to ground yourself before handling TFT-LCD module 7 Do not open or modify the module assembly 8 Do not press the reflector sheet at the back of the module to any direction 9 In case if a module has to be put back into the packing container slot after it was taken out from the contaiiner,do not press the center of the LED light bar edge,.Instead,press at the far ends of the LED light bar edge softly.Otherwise the TFT Module may be damaged 10 At the insertion or removal of the Signal Interface Connector,be sure not to rotate nor tilt the Interface Connector of the TFT Module 11 TFT-LCD module is not allowed to be twisted&bent even force is added on module in a very short time.Please design your display product well to avoid external force applying to module by end-user directly 12 Small amount of materials without flammability grade are used in the TFT-LCD module.The TFT-LCD module should be supplid by power complied with requirements of Limited Power Source(IEC60950 or UL1950),or be applied exemption 13 Severe temperature condition may result in different luminance,response time and lamp ignition woltage 14 Continuous operating TFT-LCD display under low temperature environment may accelerate lamp exhaustion and reduce luminance dramatically 15 The data on this specification sheet is applicable when LCD module is placed in landscape position. 16 Continuous displaying fixed pattern may induce image sticking.It's recommended to use screen saver or shuffle content periodically if fixed pattern is displayed on the screen The following items are characteristics summary on the table under 25℃ condition:
Iterms | Unit | Specifications |
Screen Diagonal | mm | 482.6(19") |
Active Area | mm | 376.32(H)*301.06(V) |
Pixels H*V | | 1280(*3)1024 |
Pixel Pitch | mm | 0.294(per one triad)*0.294 |
Pixel Arrangement | | R.G.B. Vertical Stripe |
Display Mode | | Normally White |
Whithe Luminance | cd/squar meter | 1000(center,Typ) |
Contrast Ratio | | 800(Typ) |
Optical Resoibse Times | msec | 25(Typ,on/off) |
Nominal Input Voltage VDD | volt | +5.0V |
Power Consumption | Watt | 37.1W(Typ)(PDD=4.7W,PLED=32.4W) |
Weight | Grams | 1990(Typ) |
Physical Size(H*V*D) | mm | 396(H)*324(V)*17.2(D)(Typ) |
Electrical Treatment | | Dual channel LVDS |
Support Color | | 16.7M colors(RGB 6-bit+Hi_FRC) |
Temperature Range Operating Storage(Non-Operating) | ℃ ℃ | 0~+60(Tgs) -20~+60(Ta) |
RoSH Compliance | | RoSH |
Below are the optical characteristics
The following diagram shows the functional block of the 19.0inches wide color TFT-LCD Module:
Package&Shippment Package:Standard export package
Shipping: 3days after the payment.The transport mode base on customer's requirment Company Info&Service Clientop Industrial Co.,Ltd ,a company with full experience in producing LCD advertising products and LCD kits.also a leading company of this line for more than 10year,with good quality and competitive price as well as very good service. In order to make sure clients can receive qualified iterm, we do 100%product test before shippment. We provide wholelife professional after-sale technical support as well whose purpose is try our best to provide best shopping experience for you!
FAQ 1 . About the quality All of our product will be testing before shipping . So you can be assured the quality of our products .
However, If you found any problem after received the goods , Please feel free contact to us .
We will be willing to deal with your problem at the first time . 2. About the payment Sample order :A Aliexpress B Paypal C Union Western
Large order: HSBC bank (Company account)
If you choose A,Then we will send the link of your order for your payment .
If you choose B or C ,Please send your shipping information (Name, address,postal code,telephone number) to me , Then I will send the PI for your payment (PI include our Paypal or Union Western account). 3. About warranty and Return We offer one year warranty for most of our products and professional technical support . Please contact us if there are any problems and we will do my best to fix it out. Here is our misrepresented & unsatisfied merchandise policy.
-- 1. We accept returns for replacement or refund within 5 days after receipt of item(s). Items MUST be in their original condition, not worn or altered.
-- 2. We do not reimburse the return shipping charge. Refunds will be for the original price paid, and will be issued within 7 business days after receipt of the return.