Q376 Customized shot blasting machine hook shot blaster Q375 hook pass through type sand/shot blasting machine is suitable for bulk of large pieces of machinery and steel structure to make surface cleaning and blasting strengthen.to remove the welding slags and surface oxide;it aslo used for surface cleaning and strengthening for heat-treated pieces;and it’s used for fear,gear shaft,engine connecting rod,diaphragm spring,cannonball inner shell and other parts surface descaling after heat-treating to make the surface of workpieces to reach the color of silver-gray,and eliminate stress,improve surface adhesion of the coating;increase the surface stress ,improve fatigue strength to reach the aim of blasting stengthen Hook Type Shot Blasting Machine For Big Workpiece
This machine has the following features: Shot blasting chamber body and blast wheel’s layout are determined by computer’s three-dimensional dynamic blasting simulation. Adopts tbe world leading technology produced Q034 blast wheels, can improve enhanced efficiency greatly to get satisfaction strengthening effect,the bearings are imported from United States BARDUN ®,special sub-pill structure,so the utilization of abraisves can be increased by 15% than the old-style,increase wear life than old-style by 60%,reduced maintenance costs by 50%.. Separator :adopts the most advanced BE full shutter type & separator in the world,can increase separating effect greatly. Adopts cartridge type dust collector,bigger filter area better filter effect. Novel design ideas,easy maintenance. This machine has automatic fault detection device,adopts advanced Switzerland GF technology,so the machine has advanced structure,reasonable design,reliable operation,high production efficiency. You can decide the quantity of working blast wheel according to different workpieces size. Some technical parameter: Main Models for the hook type shot blast machine Hook Rotary Type
Type | Size of workpiece cleaned | Carrying weight of single hook | Capacity of shot- blasting | Lifting capacity of hoist | Separating capacity of separator | Ventilation capacity | Power(excluding dedusting) | Outline dimensions |
| mm | kg | kg/min | t/h | t/h | m3/h | kw | mm |
Q376 | Ø600*1100 | 500 | 2*120 | 15 | 15 | 5000 | 19 | 4429*2825*3443 |
Q378 | Ø800*1500 | 1000 | 2*1200 | 22 | 22 | 8000 | 32.5 | 4325*2660*5009 |
Q3710 | Ø900*1600 | 1000 | 2*250 | 30 | 30 | 9000 | 36.55 | 5047*3850*5156 |
QD3710 | Ø900*1600 | 1000 | 2*250 | 30 | 30 | 9000 | 39.65 | 5844*2742*5716 |
Q3720 | Ø1400*2300 | 2000 | 3*250 | 45 | 45 | 15000 | 61.27 | 6110*3599*7842 |
Q3730 | Ø1600*2500 | 3000 | 3*250 | 45 | 45 | 15000 | 64.4 | 7085*4650*8652 |
Q3750 | Ø1800*2500 | 5000 | 4*250 | 60 | 60 | 18000 | 78.4 | 7062*5460*8652 |
Q3780 | Ø2000*3000 | 8000 | 4*250 | 60 | 60 | 20000 | 81.5 | 8050*6400*8526 |
Hook throght Type
No | Project | Quantity (set) | Index |
1 | The max dimension of the work pieces | | Turning diameter≤diameter900mm Height≤1260mm Weight≤500kg |
2 | Single hook clean-up time | | The max work pieces diameter380*1260 2 pieces/3min The min work pieces 4kgs 8pieces/3min |
3 | Blast wheel | 2 | Total abrasive flow rate:2*120kg/min |
4 | Elevator | 1 | Elevating capacity: 22t/h |
5 | Screw conveyor | 1 | Conveying capacity: 22t/h |
6 | Separator | 1 | Separating capacity:22t/h Wind speed:4~5m/s Separation efficiency≥99% |
7 | Abrasive | | ~0.5T |
8 | Dust collector | | Total ventilation capacity:6000m3/h Separator: 5000 m3/h Shot blasting chamber: 1000 m3/h Vibrating motor:0.55kw |
9 | Electric pulley-block | | Power of driving motor: 2*0.2kw Moving speed:10m/min |
10 | Dust emission concentration | | ≤120mg/ m3 |
11 | The noise of the equipment | | ≤90dB |
total power(including dust removing) about 260KW Note: We can produce the machine according to customer's different size and different requirement. In shot blasting chamber adopts Mn13 shield,Increased the lifetime of shot blasting chamber
Other pictures for reference:
Before inquiry Please indicate the following details: 1) Which kind of item do you want to clean? 2) The max. & min. size of workpieces, length, width and height of maximum workpiece 3) The max. & min. weight of working pieces 4) The expect output (daily or monthly) After get your informations, the detailed technical proposals will be sent to you for your reference