Product description
150 pound pressure class with bolted, outside screws and yoke, FLEX-WEDGE and seal welded seat rings manufactures in accordance with API 600
Applications:
- These gate valves are used in pipelines and in facilities for water, steam, non-aggressive gases, naptha, naptha derivatives and in power and process installations
- In operating conditions up to 800 degrees F (427 degrees C), in accordance with pressure-temperature rating table
- Data included in this table meets the pressure-temperature rating of ANSI B16.34
Technical data:
- Basic dimensions of the gate valves are in accordance with attributes given below
- Face to face dimensions of the gate valves are in accordance with ANSI B16.10
- Pipe flanges are regularly furnished faced and drilled with 0.062" (1.5mm) raised faces, in accordance with ANSI B16.5
- Raised face of the pipe flanges are machined in accordance with MSS SP-6
- Wedges are of single wedge flexible type providing greater sealing capabilities and lower torque requirements
- Operation is performed by non-rising hand wheel; the closing direction is to the right
- Upon request, gate valves are made with enclosed bevel gearing
- For remote control, these valves can be equipped with electric and air motor operating units
- Wedges have accurate guide slots, assuring true alignment and providing full guidance during operations
- Seat rings are sealed welded in the body and are made of carbon steel with hard faced seal surfaces
- Seat faces on the wedges are made by welding on 13 CR stainless steel
- Gate valves are provided with a backseat bushing in the bonnet, enabling replacement of the stem packing when the valve is in wide open position
These gate valves are used in pipelines and in facilities for water, steam, non-aggressive gases, naptha, naptha derivatives and in power and process installations
In operating conditions up to 800 degrees F (427 degrees C), in accordance with pressure-temperature rating table
Data included in this table meets the pressure-temperature rating of ANSI B16.34
Basic dimensions of the gate valves are in accordance with attributes given below
Face to face dimensions of the gate valves are in accordance with ANSI B16.10
Pipe flanges are regularly furnished faced and drilled with 0.062" (1.5mm) raised faces, in accordance with ANSI B16.5
Raised face of the pipe flanges are machined in accordance with MSS SP-6
Wedges are of single wedge flexible type providing greater sealing capabilities and lower torque requirements
Operation is performed by non-rising hand wheel; the closing direction is to the right
Upon request, gate valves are made with enclosed bevel gearing
For remote control, these valves can be equipped with electric and air motor operating units
Wedges have accurate guide slots, assuring true alignment and providing full guidance during operations
Seat rings are sealed welded in the body and are made of carbon steel with hard faced seal surfaces
Seat faces on the wedges are made by welding on 13 CR stainless steel
Gate valves are provided with a backseat bushing in the bonnet, enabling replacement of the stem packing when the valve is in wide open position