PVC Corner Bead Machine (one mould two profile)

(1)commodity: PVC corner bead production / PVC bend angle production line

(2) Production type of this line ( one mould FOUR profiles- produce FOUR corners bead at same time)
Note: This one mould FOUR profiles driver motor is larger than one mould double profiles

(3) components of PVC corner bead production line
1. SJSZ-51/105 conical twin-screw extruder 1set
2. Die head and mould 1unit( 2sets die moulds, 2sets pinching moulds) This mould type is one mould four profile corners
3. JDLX-4000 vacuum platform 1set
4. SLQ-90 haul off machine( Four sets of caterpillar treads) 1set
5. XQG-90 chipless cutting machine(without dust) 1set
6. TX-90*6000 stacker 1set
7. Punching machine 1set

Auxiliary machine:
1.200L high speed mixer 1set
2. SPW260 crusher 1set

(4) PVC corner bead application:
Normal dimension: Length 2 or 2.5meters
Width 20mm/25mm/28mm
Corner bead is mold and extruded with rigid PVC compounds, it can be used for exterior and interior
Wall corners to provide a rustproof, high impact resistant non-kinking corner. It's an ideal material for
Builders of stucco and plastering.

(5) Simple introduction:
PVC corner profile production line is used to produce PVC corner. This machine Can produce FOUR corners at the same time, after extrusion the PVC corner, there is a punching Machine, it is used to punch hole on the PVC corner. The punching machine is our new design, it is Automatic line.