Pusher Furnace for Firing Lithium Battery

Pusher Furnace for Firing Lithium BatteryApplications of Pusher Kiln: Suitable for the low loss rate once firing or twice firing process of cathode material of lithium batteries. Features of Pusher Kiln: Use of advanced insulation materials, highly energy efficient, unique furnace chamber and atmospheric field design, uniform temperature control and stability. The oxygen content is more than 10ppm. 1. Max Temperature: 950deg. C, Temperature Range: RT~750deg. C, 2. Dimension of the Furnace Entrance(from push board surface to the furnace roof): 700× 230mm. 3. Pusher: Full automatic circle line hydraulic pusher (max working pressure: 7 Mpa). 4. Circular Line: Single board full roller table structure (clock wise direction). 5. Main Pushing Speed: 500mm~1500mm/min. 6. Typical Process Period: 20min. 7. Heating Element: Ceramic tube with high temperature resistant heating wire through inside. 8. Atmosphere: Nitrogen(99.999%). 9. Exhaust System: There is 3 groups of exhaust stacks on the heating up zone. (6 stacks), (please see no. 3.2 for details. ). 10. Cooling Mode: Air cooling combined with water cooling. 11. Temperature Control Stability: ± 1deg. C12. Temperature Uniformity: ± 5 deg. C, (Flat High Temp Zone)13. Zone Number: 11 zones14. Temperature Control Point: 22 points15. Alarm instructions: Over temp, thermocouple failure, over load, oil pressure, water temperature, oxygen content test and other audible and visual protection16. Weight: About 6000Kg17. Overall Dimension: 23750× 5400× 1920mm (L× W× H). (Exclude mounting feet, alarm lamp and control cabinet)