Specifications Mini acrylic bending tool:
1.acrylic corner bender tool
2.acrylic rounder bender tool
3.manual acrylic tools
4.CE
Protable acrylic bending tool Manual bending tool for advertisement sign making with CE :
Type A acrylic round bender/ corner bender is the better tool for acrylic luminous characters regula heating. It is the upgrading products of former heating tools, which adopting PTC heating set for energy saving, safety, fast heating, longer life-span, auto constant temperature, no complex temperature adjusting setting, easy operating. Aluminum thermal plate is for even heating of regula, and auto-adjusting the angle between heating plate and regula which for 1.5-4mm thickness. The bender melt regula in short time, and no smoke during heating, no-stick plate by special oxidized treatment of heating plate surface. Taking high quality heat-resistant plastic for practial shell design, no more positioning required by buttom surface balance which easy for <100mm regula processing. FARW-WJA Corner Bender/Rouder bender
Operation time: Round Bender:2.5mm thickness,about 9 seconds Corner Bender:2.5mm thicknessm,about 3 seconds Turn on round bender/ corner bender, then bend pieces after about 60 seconds heating. Let the round bender/ corner bender be perpendicular to (make end surface balance) acrylic panels. Nipping right position of acrylic piece, and making the bender fit acrylic piece well, then keep several seconds for heating. Move away round bender/ corner bender, fix the acrylic piece per letter curve, angle to get finished workpiece. Keep moderate strength of bender which make heating plate joint loose if force too hard. During heating, please make the heating plate and buttom regula joint more tightly than top part since more heat loss of the former one. Keep the right force for jointing which make even heating of both buttom and top sides. If the curve more than heating area, it could be heaing 13 times continuously. It could for curve heating within 150mm. Since less heating time of the bender, it will not take much time for re-starting. Please shut off the power supply to save energy if more than 5 minutes no using. Do not put the heating plate on power supply line to avoid any dangerous. Take off power plug for long time no using. And save it when temperature reduce to <50°C. Corner bender sample
rounder bender sampls
Acrylic sampls:
Our factory