precision metal slitting machine process

To descend, turn to the left to ascend, the main fixed arch hoisting position is filled with 30# lubricating oil once every six months, and w40 lubricating oil is sprayed on the outer bearing position of the main shaft every day to moisten it. The movable arch is guided by ball guide bearings. Pay attention to keep it clean and spray w40 for lubrication. Add high temperature and high speed grease to the drive gear of the cutter shaft once a year, and the rear cover of the cutter shaft is visible after disassembly.

The main machine part is mainly used to cut raw materials into products by upper and lower knives. The sub-shear main machine is driven by an 11kw motor. The main shaft is connected to the main shaft by a gearbox through a coupling. The main body is welded by 10 cm steel plates. The main shaft is made of steel material after secondary heat treatment. It is made of precision grinding. The main shaft bearings are imported. The synchronous elevator is made of self-made material and is nitridated. It is durable and the level of the guide platform is parallel to the host to ensure accuracy. The platform is lifted and lowered by nut rotation to raise and lower, and rotate to the right.

Change the gear oil after 500 hours of initial use of the gearbox, and every 2000 hours thereafter. The gearbox is behind the main shaft.