Precast Concrete Electric Pole Mould In Myanmar

Precast Concrete Electric Pole Mould In Myanmar

Precast concrete pole mould for electric cement pole is position fixing is made by radial tongue-and groove and axial taper pin. Manufactured stage by stage and binded by bolts at last, the mould is characteristic with the advantages of esay transportation, quick assembling,correct position fixing, good rigidity and smooth working.

Length: 6m-18m

Top diameter: 150mm-230mm/Customized

Taper: 1:75/Customized

Advantage: high quality, easy operation

Pre-stressed concrete pole mould is used for electronic concrete pole making. Its mainly manufacture technology is longitudinal tension by steel wires. Then it can squeeze out the excess water in the concrete under the centrifugal force. Thus, it can greatly improve the concrete density and strength.

In order to form concrete more quickly to meet the design strength of more than 70%, steam curing can be carried out so as to shorten the mould-releasing cycle.

The Pre-stressed Electric Poles by this series equipment comply with the China Standard JC/T364-2001.

Features:

1. Welding technology, which enhances the smooth finish of the mould wall, and eliminates the uneven traces of rivet holes. So the concrete poles appearance will be improved significantly.

2. The cylinder is changed to U-type longitudinal stiffeners which can greatly increase the stiffness and flexural strength of the steel mould,

3. Install the slot with rubber sealing strip, in order to prevent leakage to ensure quality.

The Technical parameter: