PP Melt Blown Nonwoven Fabric Making Machine/ water treatment

Product Description   The micro-denier fiber (less than 0.1 denier per filament) is very fine, which only can be produced by melt blown process.It can not be used as nonwoven fibrous raw material alone but the appearance of nonwoven melt blown fabric solves this problem. Nonwoven melt blown fabric is anti-static, breathable, eco-friendly, soft, damp proof, recyclable, easy to shape, water and oil repellence, and antimicrobico.   PP melt blown nonwoven fabric making machine is an equipment that used to produce nonwoven fabric which is widely used  as filtration media, medical fabrics, sanitary products, face mask, respirator, hot-melt adhesives, oil adsorbents and so on. The principle of this equipment is as below:   Auto Feeder feeds 100% new drawing class polypropylene into Extruder. Then pp materials are melt by heating through Extruder. Roots Blowerblows the air into Air Heater and then the heated air will blow the liquid melted polypropylene materials through the Nozzle Heads, which contain hundreds of small holes in the mold, and finally threaded materials arrive at the Receiving Machine. Then  the nonwoven fabric is rolled by the Rolling machine.   Technical Data  

Item	Value
Mode	1E1M
Electricity Consumption Total installed Power(kw)
Roots Blower	11
Electricity Consumption Actual Running Power(kw)
Roots Blower	8
Production Capacity
Output	300kg/24h
Remark: 1.Room temperature affects the production capacity, 10~30℃ is highly recommended 2.But if temperature is around or little above 50degrees and we will have solution available
Nonwoven Fabric Parameter
Raw Material	100% New Drawing-Class Polypropylene
Length	500mm or 1000mm by default (free to customize)
Density	15~30g/m2(free to customize)
Melting point	160~165℃(free to customize)
Filtration	N95,N99,BFE99…(free to customize)
Strength	>=30Mpa
Other parameters
Voltage	380V/220V, charges applied if voltage changes
Frequency	50HZ
Operation Area	50m2(L*W)*3m (H) or above
Machine Weight	2.6~3.5T
Container Size	8~10 wooden boxes and use 20’’ container
Remark 1.The property of the raw material refers to the MFI (melt flow index):230℃/2.16kg. 2.E=extruder; M=mold.

              Please contact us for more information.   Application   1. Medical and hygiene: fase mask, surgical gown... 2. Homehold:facial mask, diaper, wet tissue, wallpaper, tablecloth, bag... 3. Clothing: lining, adhesive interling, flocculus 4. Industry: filtration materials, insulation material, wrap material, polishing material, strength material... 5. Agriculture: moisturing material, irrigation cloth, crop proection cloth, greenhouse cloth... 6. Others: heat preservation sound-proof material...   Company profile   ANGE is a professional manufacturer producing pp melt blown/spun filter making machine. We have independent research department to design and we excel at making new products according to clients’ special requirement. Our clients are full of the world: India, Iran, Egypt, Taiwan, Ukraine, Turkey, Pakistan, and Thailand…     After-sales service   We provide 1 year warranty; and our engineers will be available to overseas.
We also provide long-term technical guide by email or skype.     Training: 2 solutions.
1. Welcome to stay in our factory for a long-term training 7~14days until you master all the skills.
2. We provide an installing and training service to your  factory in 7~14days until  you master all the skills and you should take care of the plane ticket, hotel and living cost during this time.     See us on Aquatech China