power inverter pure sine waver Technical Parameter
ITEM | Model |
KS1000P |
OUTPUT | Rated power | 1000W |
Surge power | 120% of rated power |
AC voltage | 100/110/115/120V AC or 220/230/240V AC |
AC output regulation:10% |
Frequency:50HZ±1% or 60HZ±1% |
Wave form | pure sine wave(THD<3%)at rated input voltage |
Protection | AC short circuit,over load,over temperature |
INPUT | Bat.Voltage Range | 10.8 to 15.5(12V version),21.6 to 31(24V version),43.2 to 62(48V version) |
Efficiency | More than 85% |
Protection | battery low alarm,battery low shutdown,battery polarity reverse by fuse |
Battery Types | Open&sealed lead acid battery |
Dimension(L*W*H)cm | 31*15*7 |
Packing | PCS/CTN | 4 |
KGS/CTN | 15.5 |
MEAS(L*W*H)cm | 44*42*33 |
AC output receptacle | USA,UK,Germany,France,Australia,Brazil,Italy,South Africa,etc. |
Environment | Operating Termperature | 15℃ below zero to 40℃ |
Storage Termperature | 40℃ below zero to 85℃ |
Ralative Humidity | 20-90% RH non-condensing |
cooling way | Load and Temperature controlled multi-speed cooling fan | Load>20% or inner temperature more than 45°C,fan start work. |
Accessories | Connection Cable |
Instruction/Specification Booklet |
Replaceable fuse |
Applications | Home appliance, power tools, office and portable equipment, vehicle and yacht ...etc. |
Product Introduction A. Front Panel The front panel view shows the inverter's ON/OFF switch, AC output receptacle, Led indicator light, Vent outlet, remote control port, Chassis ground, USB.
B.Rear Panel The rear panel view shows the inverter’s cooling fan, DC battery terminals, and fuse.
C.Connection way
D. Fuse. Fuse build-out is a very good design as you can change the fuse if you inverter fuse was blown
outlet and cable connection line,plugs and receptacle can be selected by customer a.selectable socket
b.selectable plug
c.connection line
d.remote control switch
Protection Feature
l Input low voltage protection l Input over voltage protection l Short circuit protection l Overload protection l Reverse polarity protection l Over temperature protection Packing&shipping
Certifications
Warranty To keep your inverter operating properly, there is very little maintenance required. You should clean the exterior periodically with a dry cloth to prevent accumulation of dust and dirt, at the same time, tighten the screws on the DC input terminals.
We guarantee this product against defects in materials and workmanship for a period of 18 months from the date of retail purchase by end user. This warranty will be considered void if the unit has been miused, altered, or accidentally damaged. We are not liable for anything that occurs as a result of the user’fault.if the warranty period for your product has expired, if the unit was damaged by misuse or incorrect installation. If other conditions of the warranty have not been met, or if no dated proof of purchase is available. your unit may be served or replaced for a flat fee. Factory views