portable metal roofing machine

portable metal roofing machine

Our Portable metal roofing  machine,it is portable.You can use at worksite,very easy to transport.Single phase is also ok.The final product can be cut as per set length controller,and the length is automatically measured by encoder.When final product reached set length,machine will stop to cut the sheet automatically.Finish this action,the machine will run again continuously.

Clip lock standing seam roof panel are used a lot in Euro and USA,commone sizes are one inch and half inch.The installation of sheet is not by screw.The seamer and clipers are required for installation .It is composed of manual decoiler,feedint table,main forming part,automatic cutting.Our clip lock standing seam machine can make adjustable width 12-20inch

specialized manufacturer of 

Steel Bemo Roll Forming Machine

Roll Forming Machine For Rain Gutter

TECHNICAL PARAMETERS

1.Flow Chart of roll forming machine:)

2.Main components:

3.Photos of Machine:

4.Technology parameters:

The weight of machine is about0.8tons)

The total dimension of machine:1800(L)*1500(W)*1200mm(H)

4.1  4 TONS Manual uncoiler: 1SET

Capacity of uncoiler:3-4tons
Expansion of segment:manual

Rotation of segment:manual

Number of segment:4
Range of segment expansion:480-520mm
4.2 Feeding 

Entrance and adjustable wheel

Qty: 1

4.3Main forming machine

It adopts steel wall structure with chain transmission.The machine base is made by welded steel with destressing treatment

    Coil thickness:0.5-0.8mm

Main motor type: 3 phase asynchronous motor

Main motor power: 2.2KW 

Forming speed: 0-15m/min(without cutting)

Approx.6 groups rollers)

Roller :S45C with heat treatment,and surface is being hard chrome coated)

Shaft:  Shafts  of rollers are tooled by grinding machine for two times to ensure the precision of final product. 

Transmission type: by gear box and chain

 Qty: 1

4.4Hydraulic System:

Material of blade: Cr12

Length measuring: Automatic encoder length measuring

Way of cutting:The main machine automaticlly stops and the cutting will take place.After the cutting,the main machine will automaticlly start

4.5Product support frame

Size:L 3m x W .0.7m

Qty:2

4.6PLC Control System

(The whole line is controlled by PLC and touch screen.The PLC system is with high speed communication module,it is easy for operation.The technical data and system parameter can be set by touch screen.)

Control the quantity & length& cutting length automatically)

The Machine will be stopped while it is cutting

Automatic Length  measurement and quantity counting (precision 3m+/-2mm)

Voltage:110volt 60Hz or  220volt 60Hz (As per buyer`s request)