Polymer cement mortar waterproofing agent Brief introduction Polymer cement mortar waterproofing agent is a kind of powder compounded by a variety of high molecular material.Main ingredients: Germany imported powder, methyl cellulose, dura fiber, polyacrylic acid salt and other high molecular material. It is a high-performance polymer modifying agent, successfully get the function of crack resistance, impermeability, waterproof, moistureproof, antifreeze, anti-abrasion resistance, corrosion resistance etc, fully meet the National Standards. Main performance Good permeability, water reducing and enhancement effect. Mixed up this product with mortar, in order to accelerate cement hydration and dispersion, greatly reduce water consumption, block the remained holes that come from capillary channel and water evaporation after mortar hardening, avoid mortar shrinkage and crack, reduce water absorption, achieve purposes of water-proof, crack resistance, impermeability and enhancement . Application High-rise, multilayer, medium highrise buildings. Various kinds of mortar waterproofing projects such as exterior wall, kitchen, bathroom, balcony, level, window surroundings, wall pipe, ground, port, wharf, bridge, pools, water tower, and civil construction etc. Application methods and dosage 1. Mixing amount: 3.5-5% of cement dosage, stir with machinery, construct 10 minutes later. 2. Base requirement: no oil contamination, no dust. 3. Portland cement: ordinary Portland cement and slag cement will be OK, mark should not lower than 32.5 Mpa 4. Practical dosage depends on construction environment and base roughness. Package and storage 1. N.G per bag: 25kg, plastic woven bag. 2. Stored in dry, cool and smooth place, avoiding moisture and crevasse. 3. Warranty: 12 months. 4. Executive standard: JC984-2005.