POLYKEN980 Cold Applied Inner Wrap Tape

Description                                                                                                         

The temperature of the Polyken Cold Applied Wrap Tape rewinding must be above 5 degrees C, and the

construction of the anticorrosion layer should be carried out above -5 C. (experience shows that the wrap

can be carried out at a lower temperature of -30 C, but to ensure the temperature of the deconvolution.) 

When the ambient temperature is below 10 DEG C, in order to ensure the instant adhesive tape has good

bond strength, should adopt the torch tube and baking adhesive surface heating tape.For the weld, if

necessary, should be strengthened with a narrow strip of 30-50 millimeter width, first covered in the weld

and compacted with a hand or a wooden slippery tool.Polyken Cold Applied Wrap Tape including Inner Wrap

Tape, Outer Wrap Tape,Joint Wrap Tape.

Properties                                                                                                           

Adhesive : Butyl rubber and Adhesion Promoting Resins

Total tape thickness in mils:15mils(0.381mm),20mils(0.508mm),25mils(0.635mm),30mils(0.762mm)

Tape width in inches:2"(50mm),4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm)

Tape roll length in feet:100ft(30M),200ft(61M),400ft(122M),600ft(183M),800ft(244M)

production Image                                                                                              

Other Production Recommendation                                                                

Polyken955 Outer Tape,PolykenPetrolatum Tape, Polyken Aluminum Butyl Tape