Sign In Join Free
1 / 6
Polyethylene anticorrosive tape for pipeline system
| Model No. : | as your special requirement |
|---|---|
| Brand Name : | XingBang heat shrinkable sleeves |
Product description
This compound product consists of radiation cross-linked polyethylene substrate and special hot-melt sea-land, with special “memory” functions.During installation and construction of the heat shrinkable belts, the belts shrink uniformly in radial direction under thermal effect; besides, the molten hot melt adhesive wraps around and fills tightly the pipe joints and anticorrosion members, leaving a perfect sealing surface and forming a continuous and integrated anti-corrosion system with the original anticorrosive coating on pipes. This system is resistant to chemical and bacterial corrosion, to hot and cold water soaking as well as impact, and has an outstanding performance to resist ultraviolet rays. This kind of belt has the same service life with the materials of which pipes are made, and it is an ideal anti-corrosive and insulation material.
Specification of polyethylene heat shrinkable belt / sleeves
Specification | Length of sleeve | Length of patch | Wide of patch |
Φ168*500-1.2/0.8 | 700 | Equal to the wide of sleeve | 100 |
Φ219*500-1.2/0.8 | 900 | 120 | |
Φ273*500-1.2/0.8 | 1070 | 120 | |
Φ325*500-1.2/0.8 | 1260 | 120 | |
Φ355*500-1.2/0.8 | 1360 | 120 | |
Φ426*500-1.5/1.0 | 1600 | 120 | |
Φ508*500-1.5/1.0 | 1860 | 150 | |
Φ529*500-1.5-1.0 | 1920 | 150 | |
Φ610*500-1.5/1.0 | 2220 | 150 | |
Φ711*500-1.5/1.0 | 2560 | 150 | |
Φ813*500-1.5/1.0 | 2880 | 150 | |
Φ1219*500-1.5/1.0 | 4180 | 150 | |
Attention: The above data is normal size. Produce certain size of products according to the customers' demand | |||
heat shrinkable belt / sleeves performance | ||
Item | Test method | Performance |
backing | ||
tensile setength | GB/T1040/ASTM D638 | ≥17MPa |
elongation(23℃) | GB/T1040/ASTM D638 | ≥400% |
vicat softening point | GB/T1633/ASTM D1525 | ≥90℃ |
brittleness temperature | GB/T5470/ASTM D2671C | ≤-65℃ |
dieletric strength | GB/T108/ASTM D19 | ≥25MV/m |
volume resistivity(23℃) | GB/T1410/ASTM D257 | ≥1x1013Ω.m |
environmental stress crack | GB/T842 | ≥1000h |
chemical resistance | ||
10%HCI(immerge for 7days) | GB/T1040/ASTM D638 | ≥85% |
10%NaOH(immerge for 7 days) | GB/T1040/ASTM D638 | ≥85% |
10%NaCL(immerge for 7days) | GB/T1040/ASTM D638 | ≥85% |
thermal aging(150℃,210D) | ||
tensile setength | GB/T1040/ASTM D638 | ≥14MPa |
elongation | GB/T1040/ASTM D638 | ≥300% |
adhesive | ||
softening point | GB/T4507/ASTM E28 | ≥90℃ |
lap shear | GB/T7124/ASTM D1002 | ≥1MPa |
brittleness temperature | ASTM D2671C | ≤-15℃ |
peel strength | ||
heat-shrinkable sleeve/steel | GB/T2792/ASTM D1000 | ≥70N/cm |
heat-shrinkable sleeve/primer | GB/T2792/ASTM D1000 | ≥70N/cm |
heat-shrinkable sleeve/PE layer | GB/T2792/ASTM D1000 | ≥70N/cm |
non-solvet epoxy primer | ||
shear of cuied primer | SY/T0041 | ≥5MPa |
cathodic disbonding(65℃,48h) | SY/T0413 Appendix B | ≤10mm |
Annotation: Chemical Resistance includeds tensile strength and maintenance rate of elongation at break. | ||
Hot melt adhesive performance | |||||
No. | Item | Test condition | Index | Test method | |
1 | softening point | —— | ≥90℃ | GB/T4507 | |
2 | peel strength | PE/PE | (23±2)℃ | ≥70N/cm | GB/T2792 |
PE/steel | (23±2)℃ | ≥70N/cm | GB/T2792 | ||
3 | peel strength | PE/PE | (50±2)℃ | ≥15N/cm | GB/T2792 |
PE/steel | (50±2)℃ | ≥15N/cm | GB/T2792 | ||
4 | shear strength | PE/PE | (23±2)℃ | ≥1.0MPa | GB/T7124 |
PE/steel | (23±2)℃ | ≥1.0MPa | GB/T7124 | ||
any question, pls feel free to contact with us, we are willing to be on service of you: 
Send your inquiry to this supplier
Product Alert
Subscribe to your interested keywords. We will send freely the latest and hottest products to your Inbox. Don't miss any trade information.
Your use of this website constitutes acknowledgement and acceptance of our Terms & Conditions.
Copyright © 2009-2024 Bossgoo Co., Ltd. All rights reserved.
