Product description
CLAMPING FORCE 2000KN
MAX TEMP 21MPa
CLAMPING STROKE 300mm
FAST CLAMPING SPEED ≥60mm/s
HEATER PLATEN SIZE 550×600mm2
HEATER PLATEN DISTANCE 180~480mm
MAX TEMP 250
EJECTOR STROKE 300mm
MOTOR POWER 5.5kw
HEATER POWER 12kw
EJECTOR TONNAGE 60KN
OIL TANK CAPACITY 480L
EXTERNAL DIMENSION 2000mm×2050mm×(1800-2100)mm
WEIGHT 4.5T
rubber injection moulded products:
automobile parts(shock absorber), construction(rubber mat), medical equipment(stopper for glass utensils), electric power(rubber insulation gloves) as well as Rubber Boots, Rubber Bellows, Rubber Gasket, Rubber Bumper, Rubber Dust Cap, Rubber O Rings, Rubber Couplings, Rubber Washers, Rubber Seals, Rubber Grommets.
2RT
1initial state
2start-up(ejector reposit)
3load the mould
4main cylinder goes up rapidly
5main cylinder goes up slowly, increase pressure
6put material in , injection pole goes down, expel bubbles out and vulcanizing
7injection pole goes up, open the mould
8push out the mould
9eject the mould, pick up the finished products
3RT
1initial state
2m2 the second mould platen goes down
3 m1 the first mould platen goes down
4 load the mould
5 main cylinder goes up rapidly, increase pressure
6 Put material in, injection pole goes down, expel bubbles out and vulcanizing
7 injection pole goes up, open the mould
8 push out the mould
9 m1 the first mould platen goes up
10m2 the second mould platen goes up and opens the mould
4RT
1initial state
2lower platen(L) goes down,m2 the second mould platen goes up, m3 the third mould platen goes forward with the slide plate
3m2 the second mould platen and m1 the first mould platen go down
4load the mould, main cylinder goes up and increase the pressure
5put material in , injection pole goes down, expel bubbles out and vulcanizing
6open the mould ,injection pole goes up, push out the mould
7m1 the first mould platen goes up
8m2 the second mould platen goes up and opens the mould
9m3 the third mould platen goes back with the slide plate
10m2 the second mould platen goes down and locating
11lower plate (L)goes up ,take out the finished product, clean the mould