Plastic toy injection molding machine

plastic toy injection molding machine
Ningbo Machinery Industry Co., Ltd. a wholly owned subsidiary company of Chenglu Group, devoted itself to creating the [Swift-horse" in the plastic industry. With almost 20 years` development, Bole Machinery has grown-up into a global well-known injection molding machine brand with independent R&D ability. There are 30 series, more than 100 models products, like EKII series central locking toggle precision injection molding machines with the clamping force from 70 Ton to 4000 Ton, DK series electric-hydraulic two-platen injection molding machines, CIML series carbon-fiber product injection molding machines, EKII/J series pipe fitting special machines with large injection volume, custom-made machines for special technical materials etc. Bole Machinery has been involved in the scientific research projects, such as [National Important Torch Program" and [National Important New Product Project" and designates [National High-Tech Enterprise" by the Chinese Ministry of Science and Technology. It has been listed into [China Injection Molding Machine Special Industry Base" (one of the three important enterprises won this honor in Chinese Injection Molding Machine Industry). [Bole" brand was awarded [Zhejiang Province Well-known Brand", [Zhejiang Province Famous Brand Product".

1. Product Instructions

Bole centre clamping structure

■ 100% clamping force use, 10%-20% higher than traditional toggle structure.

■ Less possibility of flash, save flash trim work.
■ Save 2-5% material.
■ Offer good protection to mould, platens and tie bars.
■ Opening stroke 10-20% longer.

 Traditional structure
■ With heavy clamping force waste, only 80-85% efficiency.
■  Moving platen with obvious deformation, cause flashes, waste of material and labor of trim the flashes.

EKH系列技术参数表		UNIT	BL800EKH/C8600
国际标准规格	International specification		8600
螺杆直径	Screw diameter	Screw specifications	A	B	C
		mm	95	105	115
螺杆长径比	Screw L/D ratio		23	21	19
理论注射容积	Theoretical injection capacity	cm3	3861	4717	5658
注射量 (以PS计)	Shot weight(PS)	g	3552	4339	5205
		oz	125.5	153.3	183.9
最大对空注射速率	Injection rate into Air	cm^3/s	734	897	1076
最大对空注射速率		g/S	668	816	979
注射压力	Injection pressure	MPa	223	183	152
理论塑化速度	Theoretical plasticizing speed	g/S (PS)	134	180	231
注射行程	Injection stroke	mm	545
最大注射速度	Max. injection speed	mm/s	104
最大螺杆转速	Screw speed	r/min	152
系统压力	Sys. Pressure	MPa	17.5
电机总功率	Pump Motor(Min～Max)	kW	89～91.6
电机数量	number of Motors	PCS	2
预塑电机功率      （1850-4000吨标配)	Pre-plastic motor power		Optional
电热功率	Heater power	kW	50.1
温控区数	Number of temp. control zones		5+1
锁模力	Clamping force	kN	8000
开模行程	Opening stroke	mm	1050
拉杆内间距	Space between tie bar	mm x mm	1055×955
最小模具厚度(T型槽)	Min. mould height	mm	450
最大模具厚度(T型槽)	Max. mould height	mm	1000
最大模板距离(T型槽)	Max. Daylight	mm	2050
顶出行程	Ejector stroke	mm	270
顶出力	Ejector force forward	kN	166
顶针回缩力	Ejector force back	kN	117
顶出杆数	Number of ejector bar	PC	21
干循环时间	Dry Cycle Time	S	4.5
能耗（注1）	Energy consumption level	kW.h/kg	≤0.4（1级）
料斗容积	Hopper capacity	kg	100
油箱容量	Oil tank capacity	L	1070
机械外形尺寸(约)	Machine dimensions(L×W×H)	m x m x m	10.4x2.5x3.1
机器重量(约）	Machine weight	Ton	30

2. Bole Competitive Philosophy

Leading technology and performance

China unique producer, central locking toggle

CIML carbon-fiber products intelligent moulding line, made for lightweight of automobile

The performance of Electro- hydraulic hybrid two platen machine has reached the leading level

3. Clients Cases

plastic toy injection molding machine

4. About Bole Machinery