plastic blowing bottle machines
ZQ-A series, Automatic Stretch Blowing Machine With Preform Manual Loading
ZQ-A series, newly developed by our company, is a two-step automatic blow-molding machine, which requires labor to put performs into the preheater only. ZQ-A series is of one cavity and the maximum cavity of the bottles is 0.6L,2.0L,5L. It can blow various bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET, PP etc.
Compared with other full-automatic series, ZQ-A series has no automatic conveyer, so it can't transfer performs automatically, but requires labors to put performs into preheater. The distinctive feature of the ZQ-A is as follows: it has saved the cost to the maximum extent; it has lower rejection rate, higher production, and more stable performance than the semi-automatic one, and moreover, it is easy to run. Therefore, it will take the place of the semi-automatic blow-molding machine.
plastic blowing bottle machines
TYPE |
ITEM |
ZQ-A600 |
ZQ-A600-2 |
ZQ-A600-3 |
CONTAINER |
Number of cavity |
1 |
2 |
3 |
Output |
1100-1400 pcs/hr |
1700-2300 pcs/hr |
3000-3300 pcs/hr |
Max.container volume |
0.6L |
0.6L |
0.6L |
Max.neck diameter |
38mm |
38mm |
38mm |
Max.container diameter |
60mm |
60mm |
60mm |
Max.container height |
260mm |
260mm |
260mm |
ELECTRICAL SYSTEM |
Number of lamp |
14pcs |
28pcs |
32pcs |
Max.heating power |
9kw |
22kw |
32kw |
Installation power |
12kw |
25kw |
35kw |
Actual power consumption |
9kw |
14kw |
20kw |
AIR SYSTEM |
Operatating pressure |
7kg/cm² |
7kg/cm² |
7kg/cm² |
Low pressure consuming |
800Ltr/min |
1000 Ltr/min |
1200 Ltr/min |
Blowing pressure |
≤30kg/cm² |
≤30kg/cm² |
≤30kg/cm² |
High pressure consuming |
1200-1600Ltr/min |
1500-2000Ltr/min |
2000-2500Ltr/min |
CHILLER WATER |
Operating pressure |
5-6 kg/cm² |
5-6 kg/cm² |
5-6 kg/cm² |
Temperatuer |
10°C |
10°C |
10°C |
Consuming |
3600kcal/hr |
5600kcal/hr |
7600kcal/hr |
Flow rater |
20Ltr/min |
30Ltr/min |
40Ltr/min |
MACHINE |
Machine dimension |
2.5×1.4×1.7(m) |
2.9×1.55×1.8(m) |
3.4×1.4×1.8(m) |
Machine weight |
1.5T |
1.6T |
1.9T |
Note: The specifications are subject to change without notice for the further improvement.
Machine settings
a).PLC colour display: OMRON(JAPAN)
b).Pneumatic parts:AIRTAC(TAIWAN)
c).Controller of preform transfer:Servo motor DELTA(TAIWAN)
d).Other electric parts are all world-famous brand