1 / 4
Model No. : | T500 |
---|---|
Brand Name : | XUNDA |
Product description
Pipe coating materials PP wrap tape the XUNDA-T 500 series is cold applied tape for both metallic pipelines and waterproofing works against outdoor bad weathers .
Pipe coating materials PP wrap tape shall be applied after the Liquid adhesive by hand or with a wrapping machine.
Pipe coating materials PP wrap tape is a bituminous self-adhesive joint sealing and water proofing membrane with an integral robust, woven polypropylene backing medium,which imparts high mechanical strength, impact resistance and elasticity;
xunda company for corrosion prevention and dielectric protection and is typicallyused for underground pipe work and metal structures, particularly
concrete sealing and bitumen overlaying on roads
Structures
The specification of the tape consists of three layers,
Adhesive layer: Butyl rubber Bituminous Compound
Backing : PP woven fabric cloth
Interleaf:Film Treated with Silicone
Pipelines protection
1:Weld joints
2:Bends
3:Fittings
4:Bare pipe lengths
5:Pipe rehab and repair
6:Bare pipe length
Pipes protection
Cold applied
Excellent self adhesion to pipe
Flexibility provides extra protection at vulnerable areas
Excellent conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodicdisbonding
Usage
This successfully proven tape is the best solution for coating
of pipes and/ or repair, due to its tenacious adhesion,
mechanical characteristics, ease of use, good elongation and flexibility.
Xunda T500 Polypropylene bitumen tape exhibits exceptional
adhesion to concrete, metals and plastics. When adhering to
porous surface it may be beneficial to use Flexi Seal Primer.
The plastic nature of the product allows it to comfortably
accommodate both substrate vibration and some movement.
Production
Xunda T500 Polypropylene is produced in one of the
newest and most modern plants in the world.
The quality control department constantly and continuously
monitors the raw materials, the production and packaging
in order to ensure a high quality product. Sizes, article and
batch numbers are indicated on each roll.
Test Data sheet
Physical Properties |
Test Method |
BR/BC T560 |
BR/BC T580 |
|||||
Total Thickness |
English |
|
45mils |
50mils |
55mils |
60mils |
65mils |
|
Metric |
ASTM D 1000 |
1.15mm |
1.27mm |
1.40mm |
1.50mm |
1.65mm |
||
Adhesive Thickness |
ASTM D 1000 |
0.85mm |
0.97mm |
1.10mm |
0.90mm |
1.05mm |
||
Backing Thickness |
ASTM D 1000 |
0.30+0.05mm |
0.60+0.05mm |
|||||
Tensile Strength |
ASTM D 1000 |
>600 N/cm (342.6 lbs/in) |
>800 N/cm (456.8 lbs/in) |
|||||
Peel strength to Primed Steel at |
||||||||
At 23 ºC |
ASTM D 1000 |
>80 N/cm |
( >731 oz/in ) |
|||||
At 50 ºC |
ASTM D 1000 |
>10.5 N/cm |
( >96 oz/in ) |
|||||
Adhesion to backing at |
ASTM D 1000 |
>65 N/cm |
( >594 oz/in ) |
|||||
Cathodic Disbondment |
ASTM G 8 |
8.0mm |
( 0.315 in radius ) |
|||||
Water Absorption Rate |
ASTM D 570 |
<0.10% |
( <0.10% ) |
|||||
Water Vapor Transmission Rate |
ASTM F 1249 |
<0.15 g/m2·24h |
( <0.01g/100sqin/24h ) |
|||||
Insulation Resistance |
ASTM D 257 |
2.5×1012 ohm·cm |
( 2.5 by 10E 12 Mohm ) |
|||||
Dielectric Strength |
ASTM D 149 |
25 KV |
( 25 KV ) |
|||||
Impact Resistance |
ASTM G 14 |
23 N·m |
( 204 in·lbs ) |
|||||
Color |
Black |
|||||||
Tape width in inches |
50mm(2"),101mm(4"),152mm(6"),228mm(9"),305mm(12"),457mm(18"), |
|||||||
Tape roll length in feet |
15m(50ft),25m(82ft),30m(98ft),50m(164ft),61m(200ft),100m(328ft),122m(400ft), |
|||||||
Core size |
38mm(1.5"),76mm(3") core of paper or hard plastic |
|||||||
Application Temperature |
-34 ºC to +120 ºC |
( -29 ºF to 120 ºF ) |
||||||
Operating Temperature |
+120 ºC |
( 248 ºF ) |
Application
1 Rust Removal
Steel Surface needs treating. Its quality shall reach Sa2 or St3 grade as prescribed in GB8923-88 Pre-paint Steel Surface Rust Grade and Rust-removal Grade, and it shall be dust-free.
2 Priming
Primer shall be stirred well before painting. An even film of primer is painted on the steel surface that is rust-removed completely and dust-free. After the primer dries up (one may feel no sticky). The steel pipe can be wrapping with tape (it usually takes 3 to 5 minutes). The primer dosage usually amounts to 80 to 100g / m².
3 Inner Tape (Anti corrosion Tape) & Outer Tape (Protection Tape) Wrapping
The steel pipe that is painted with primer is wrapping with tape by means of suitable devices or tools as per joint needs, and wraps the inner tape and then wraps the outer tape. Tape tensibility can be 10 to 20 N / cm. The overlapped length between beginning and end of an adhesive tape shall be no less than 1/4 circumference of the steel pipe and the total length of adhesive tape shall be no less than 100mm. each film shall be paralleled, and must not be twisted and rumpled.
TRADE TERMS:
1 Payment: 30% T/T DEPOSIT PAYMENT IN ADVANCE, BALANCE AGAINST COPY OF B/L, WESTERN UNION, ESCROW, L/C.
2 Production Lead Time: 10 - 15 DAYS AFTER DEPOSIT PAYMENT.
3 Shipping Methods: OCEAN FREIGHT / AIR FLIGHT /COURIER PRESS
4 FOB Shipping port: QINGDAO, SHANGHAI ,OTHER PORTS, MAINLAND CHINA.
5 If you want to deal with EXW/CIF/CNF term instead of FOB, please specify. Otherwise, FOB price will be quoted under inquiry.
OUR SERVICE:
· Your inquiry related to our product & price will be replied within 24hours.
· Well-trained & experienced staffs are to answer all your inquiries in English of course.
· Working time: 8:30am - 6:00pm, Monday to Saturday (UTC+8).
· OEM & ODM projects are highly welcomed. We have strong R&D team here to help.
· Your business relationship with us will be confidential to any third party.
· Good after-sale service offered, please get back if you got question.
Send your inquiry to this supplier