Pellet mill dies manufacturers in germany

Specifications Pellet mill

1. High efficiency good quality

2. High return Low invest

3. Easy to operate

4. CE certificate

Pellet mill dies manufacturers in germany Pellet mill machine is a kind of special equipment which takes sawdust, palm, peanut shell and other crops as raw materials and compressed them into pellets. The pellets produced by this kind of equipment have big density, high heat value, combustion resistance. Due to its small volume, simple operation, it can be used for making pellets at home.     Features of  pellet mill Wide suitability of materials, like sawdust, leaf, straw and other biomass materials. Stable performance, high output and low power consumption. Simple maintaining, low failure rate, easy operation. The machine is casting as an integer with firm structure and long life span, motor-driven pellet mill or diesel engine-driven pellet machine are available for choosing according to clients requirements. High temperature heat treatment of flat die and compressing rollers, lower cost of high resistance spare parts. High ratio of molding and high density of pellets. Diameter of pellet are ranged fromΦ6—Φ12, according to customers requirements.      

Type	Power	Capacity	Dimension(mm)	NG/GW (kg)	Note
ZLSP200B	3-phases/7.5kw	200-300	1000x430x950	200/230	With Motor
ZLSP200B		200-300	900x430x950		Without Motor
ZLSP230B	3-phases/11kw	300-400	1140x470x970	290/320	With Motor
ZLSP230B		300-400	980x470x870		Without Motor
ZLSP260B	3-phases/15kw	400-600	1200x500x1070	330/360	With Motor
ZLSP260B		400-600	1120x490x1070		Without Motor
ZLSP300B	3-phases/22kw	700-800	1270x520x1070	410/450	With Motor
ZLSP300B		700-800	1170x520x1070		Without Motor
ZLSP360	3-phases/22kw		1270x520x1070	470/500	With Motor
ZLSP360			1270x520x1070		Without Motor
ZLSP400	3-phases/30kw	900-1100	1470x600x1150	550/585	With Motor
ZLSP400		900-1100	1470x600x1150		Without Motor

      Attentions of operation; The operators should read the instructions carefully and have good understanding of the character of the homemade pellet mill, structure and application method. Stall and debug, use and maintain the pellet mill according to regulations. Before connect the power supply, examine the ground cable is fine or not at first. Connect to the power of the machine and start the pellet mill are serious prohibited before connected the ground cable Don’t inspect or replace the spare parts with the live cables, or the operators can get a shock or injured. Be sure to stop the pellet mill when the service man maintain the pellet mill, and cut off all the electricity supply and hang on the warning sign, to prevent human error accident from unexpected operation of machine. Special lubricant should be added into the bearing of compression rollers of the pellet mill after every 12 hours of the operation of the pellet mill. Please do cut off the electricity when rotating the compression rollers by hand. Please do not touch the rotating compression rollers and flat die by hand or other objects. The clearance between the compression rollers and the flat die should below 10.mm, too small the clearance give rise to over wear resistance between compression rollers and flat die, even the damage of the whole pellet mill. When the temperature of the homemade pellet mill is below 10℃, the lubricant of the pellet mill are easy to freeze. Please warm the homemade pellet mill to 10℃ and start the machine.     Kingman boasts the best pellet mill manufacturer and supplier of China. Primary productions of KMEC: series of wood pellet mill, feed pellet mill,crushing machine production line etc. Feed pellet mill, wood pellet mill of our company are popular on the market and welcome the clients to purchase our products.      pellet mill dies manufacturers in germany