Peacock blue non-metallic ground hardener

Peacock blue non-metallic ground hardener

Peacock blue non-metallic ground hardener Product introduction:

Peacock Blue Non-metallic Floor Material is composed of mineral alloy aggregates with certain particle size, special cement, other admixtures and admixtures. It is evenly spread on the concrete surface in the initial setting stage, and processed by special means to form a whole with the concrete floor, and has high-density and coloring high-performance wear-resistant ground.Anti-static Ground Hardener,Anti-static Fire-free Aggregate,Iron Green Non-metallic Floor Hardener.

Peacock blue non-metallic ground hardener the performance characteristics of:

Synchronize with concrete ground.

Peacock Blue Non-metallic Wear Floor Basic requirements:

The concrete strength requirements of the concrete base are above C25, and the water-cement ratio is below 0.50, and the concrete slump should be controlled at 70-100mm, and the concrete mixing plant can reduce the segregation and control the bleeding. In order to ensure that the concrete mix is sufficiently liquid and conducive to construction, concrete admixture is recommended. The concrete should be poured and vibrated according to the standard of good concrete, and the size should be taken care of and the slurry will be reduced. Hardener surface layer with concrete structure construction at the same time, such as screed-coat construction at the same time, suggest using fine aggregate concrete, concrete leveling layer thickness of not less than 50 mm, and consider the configuration telescopic steel fabric pay special attention to the corner of the concrete block construction at the grass-roots level, ensure it concrete vibratory compaction, and additional strengthening treatment should be taken.Non-metallic Ground Hardener.

The construction technology Metal Floor Hardener:

Leveling: use 6 meters of scraper to evenly spread the abrasive materials along the horizontal and longitudinal direction. Second cloth material: dosage would stipulate a third color evenly cloth emery wear-resisting flooring materials (after the first grinding emery wear-resisting flooring material surface), again with flattening machine polishing processing; Surface polishing: according to the hardening condition of concrete, adjust the blade Angle of the polishing machine to ensure the surface smoothness and finish. Base level keeps expanding: emery wear-resisting flooring in the construction of 4 ~ 6 hours, after the completion of maintenance should be on the surface, to prevent surface water evaporation, sharply to ensure the steady growth of emery wear-resisting floor strength.Red Non-metallic Floor Hardener.