PC300RC Rock Bucket Tooth Point for excavator bucket teeth

Specifications Bucket Tooth Point

1.Advanced heat-treatment

2.One stop purchase

3.Fast delivery

4.ISO9001-2008

Technical Information for bucket teeth,adapter,side cutter:

Chemical Composition & Mechanical Properties
No	Material No	Product	Impact Toughness (ak/JC m2)	Hardness HRC	Tensile Strength	Elongation	Working Condition
1	1#	Adapter,side cutter, protect panel etc.	>= 15	40~46	>= 1300	>= 4	Normal temperature
2	2#	Teeth/Loader teeth	>= 13	48~52	>= 1500	>= 4
3	3#	Adapter(>40tons machine) High Quality	>= 20	40~46	>= 1350	>= 5
4	5#	Teeth (>20 tons machine) high quality	15~25	50-54	>=1550	>= 5

1.WAX INJECTION:Wax design of the desired castings are produced by injection molding.These designs are called patterns.     
2.ASSEMBLY:The patterns are attached to a central wax stick,called a sprue,to form a casting cluster or assembly.     
3.SHELL BUILDING:The shell is built by immersing the assembly in a liquid ceramic slurry and then into a bed of extremely fine sand.Up to eight layers may be applied in this manner. 
4. DEMAX:Once the ceramic is dry,the wax is melted out,creating a negative impression of the assembly within the shell. 
5.CONVENTIONAL CASTING:In the conventional process,the shell is filled with molten metal by gravity pouring.As the metal cools, the parts and gates,spure and pouring cup become one solid casting. 
6.KNOCKOUT:When the metal has cooled and solidified,the ceramic shell is broken off by vibration or knock-out machine. 
7. CUT OFF: The parts are cut away from the central spure using a high speed friction saw. 
8.CLEANING AND GRINDING: When the fomred casting parts are finished, they will be cleaned by hand work totally.After that, all the parts will be put in to the grinding machine for spot blasting. After these operations, the metal castings becomes identical to the original wax patterns. 
9.HEATTREATMENT: Once the parts are finished by cleaning, they will be put in to heattreatment machine , in order to get a good harness and anti-wearness,as well as good impact performance. 
10.PAINTING: Sprat painting method is used to paint the parts with different colors. Then they will be given special time for dry,  so that they can be kept as shining and smooth. 
11.PACKAGE: Man-made wooden carton is used for package,which is no need for fumigation. 
12.SHIPPMENT: When all these work is done, finished products is ready to ship to every cornor of the world.   Workshoe for G.E.T parts:   Bucket Teeth & Adapters & Side Cutter: 

Original Part No.	Model & Family	Description
20X-70-14160	PC60-PC100,WA180-250	Tip-Standard
20X-70-14151 (25mm)	PC60-PC100,WA180-250	Adapter
205-70-19570	PC120-PC210	Tip-Standard
205-70-19570RC	PC120-PC210	Tip-RC
205-70-19570SYL	PC120-PC210	Tip-SYL
205-70-19570VIP	PC120-PC210	Tip-VIP
205-939-7120 (30mm)	PC120-PC210	Adapter
207-70-14151	PC220-PC380	Tip-Standard
207-70-14151RC	PC220-PC380	Tip-RC
207-70-14151SYL	PC220-PC380	Tip-SYL
207-70-14151VIP	PC220-PC380	Tip-VIP
207-939-3120 (40mm)	PC220-PC380	Adapter
208-70-14152	PC400,PC450	Tip-Standard
208-70-14152RC	PC400,PC450	Tip-RC
208-70-14152SYL	PC400,PC450	Tip-SYL
208-70-14152VIP	PC400,PC450	Tip-VIP
208-70-14143 (50mm)	PC400,PC450	Adapter
209-70-54210RC	PC650,PC750	Tip-RC
205-70-74180	PC120-PC210	4-Bolt Hole Side Cutter
205-70-74190	PC120-PC210	4-Bolt Hole Side Cutter
207-70-34160	PC220-PC380	5-Bolt Hole Side Cutter
207-70-34170	PC220-PC380	5-Bolt Hole Side Cutter
419-70-13113	WA250,WA320	Bolt-On Monoblock Tip
419-70-13164	WA250,WA320	Bolt-On Monoblock Tip
419-70-13174	WA250,WA320	Bolt-On Monoblock Tip
423-70-13113	WA380,WA420	Bolt-On Monoblock Tip
423-70-13144	WA380,WA420	Bolt-On Monoblock Tip
423-70-13154	WA380,WA420	Bolt-On Monoblock Tip