Panasonic Axial Lead Component Insertion Machine AV131
Panasonic Axial Lead Component Insertion Machine AV131
Panasonic Axial Lead Component Insertion Machine AV131

1 / 1

Panasonic Axial Lead Component Insertion Machine AV131

Get Latest Price
Send Inquiry
Model No. : NM-EJA2A, NM-EJ3A
Brand Name : Panasonic
5yrs

Shenzhen, Guangdong, China

Visit The Store
  • Gold Supplier
  • Platform Certification
  • Online Expo
  • Video

Product description

The AV131 is a VCD axial lead component insertion machine capable of high-speed insertion at a tact timeof 0.12 s/component, providing high economic efficiency.With the adoption of vertical feeders that allows multiple inputs (120 inputs) and the two separate supply units that improve operation rate, the AV131 is promising for greatly contributing to continuous unmanned operation.Also, the optionally available jumper wire insertion function enables insertion of jumper wires without the need for taping, which not only eliminates waste but also realizes highly efficient and flexible production. 

Features

Higher Productivity

Insertion Tact Time

High-speed insertion at 0.12 s/component improves the productivity significantly.  

High-speed X-Y Table

Lightweight and highly rigid design provides

higher speed X-Y table.

Insertion Tact Time for Four Directions

(0, 90, 180 and 270 degrees)

Compact and lightweight insertion unit and the direct drive

system adopting a hollow shaft motor offer high-speed

insertion while the insertion unit is rotating.

Two Separate Part Supply Units (NM-EJA3A)

Part supply unit separated into two tables allows the supply operation mode to be selected according to

the production needs, thus improving operation rate. (5 modes are available.)

Random-Access System

The random-access system allows insertion errors to be recovered quickly by just operating the buttons.

Higher Reliability

Longer Life Consumable Parts

Reversible tape cutter and

reversible lead cutter (fixed side)

offer a longer life of these

consumable parts.

The insertion guide and pusher

made from carbide materials also

ensure a longer life of them.

Circular Arc Flat Cable

The head and the anvil rotation unit adopting the circular arc flat cable offer a longer life for the wiring in

the movable section.

Centering Function

The centering function for correcting components off-centered on the tape prevents interference

between components and the insertion pusher, thus achieving highly reliable insertion.

Damper Type Tape Cutter Unit

The tape cutters provided with a damper of 2.5 mm stroke (5 mm in all) reduce possible damage to the

cutters in case foreign matter is caught in them.

Whole Area Self-correction Function as Standard Feature

Recognizes both of two holes at the insertion position to make optimum positional correction for stable

insertion.

In addition, corrections of rotational error and insertion pitch are also enabled for highly accurate

positioning (XY, θ and W), offering higher insertion rate. 


Power supply  Rated voltage         3-phase 200 / 220 / 380 / 400 / 420 /
                                   480 V selectable
 Frequency               50 / 60Hz
 Rated capacity       Approx. 4kVA
Air supply  Service air pressure       0.5 MPa
 Air consumption              Approx. 150 L/min. (A.N.R)
Note: Quick coupler attached (SMC KK13P-03M, KK13S-03F).
Dimensions  NM-EJA3A             W4070 × D1910 × H1610 mm
                                  (Not including signal tower)
 NM-EJA2A             W2810 × D1910 × H1610 mm
                                  (Not including signal tower)
Mass  NM-EJA3A          Approx. 2,520 kg  (main body only)
 NM-EJA2A          Approx. 1,750 kg  (main body only)
Environmental requirements  Ambient  temperature      20°C ± 10°C
 Humidity                           25 ~ 75%RH (with no condensation)
 Height above sea level    1,000 m or below
Transport and storage  Ambient temperature -20 ~ 60°C
 Humidity 75%RH or less (with no condensation)
Operating controls  Interactive operation via color LCD touch screen
   (Front and Rear: Standard equipment)
   English/Japanese/Chinese selectable with a single button
   Recognition  screen (displays the recognized board image
    on a superimposed window)
    Hierarchical menu (Operator/Engineer)
 I /O functions         3.5-inch FDD and SDD (standard equipment)
 Communication    RS-232C
Coating color  Standard color      White: W-13 (G50)
Insertion tact time  Max. tact time: 0.12 s/point
Max. tact time conditions by component type and insertion direction
                            Applicable
                           component
Insertion
direction

       Axial lead 

     component

         Jumper wire
                    X (0°) 0.15 s/point         0.12 s/point
                  Y (90°) 0.12 s/point         0.15 s/point
               -X (180°) 0.15 s/point                  -
              -Y (270°) 0.24 s/point                  -
Other conditions for max. tact time (0.12 s/point)
 X-Y table movement
   Within 35 mm for X and 39.5 mm for Y (When interlock 2 is selected)
   (However, within 30 mm for X and 34 mm for Y when there are
   components above 3 mm high on the PCB. (When interlock 1 is
   selected))
 Feeder movement
   None
   (When the feeder moves by 1 pitch, the tact time will be 0.14 s/point.)
Pitch changeover  5.3 mm within the tact time (0.12 s/point)
Applicable components  Taped axial lead components
  (carbon resistor, cylindrical ceramic capacitor, solid resistor, diode and
   taped jumper wire)
 Jumper wire (optional)
   Refer to `Insertion Component Specifications` in this section for
   component dimensions.
Component packaging  Flat pack
PCB replacement time  Approx. 2 s (Ambient temperature: 20°C)
Applicable PCB  Dimensions
  Min. 50 × 50 mm to Max. 508 × 381 mm
  Width-to-length ratio: Width should be equal to or less than length.
  Consult us for boards having width longer than length.
 Allowable insertion area
  Min. 50 × 40 mm to Max. 508 × 371 mm
 Thickness
    1.6 ± 0.15 mm (for standard specification)
    *1 Although boards of thicknesses from 0.6 mm (min.) to 2.0 mm (max.)
      are applicable, changes to the transfer rail (option) are required
      if outside the above standard range.
    *2 Even if the board thickness is within the above range, clinched
      angle of the inserted lead or lead length may vary, or board
      transfer error may occur depending on the shapes of board or
      insertion holes. So it is recommended to perform an advance 
      evaluation.
 Mass
    Max. 1 kg per board including inserted components.
 Flow direction
    Right to left (Standard) or Left to right (option)
 Board positioning method
    Pin positioning (Standard, without positioning in the Y direction),
    Edge positioning (Option, with positioning in the Y direction)
* Contact us for the board positioning in the Y direction.
Insertion pitch  5 ~ 26 mm (can be set in 0.01 mm increments)
(Jumper wire: 5 to 26 mm (Option))
Insertion direction  4 directions (X, Y, -X and -Y)
Anvil  Cutting & Clinch type system (Piezoelectric detection system
No. of component inputs NM-EJA3A
1. Taping width: 26 mm
120 inputs (60 + 60) + drum type jumper wire (Option)
2. Taping width 52mm (Pack width Max. 80)
120 inputs (60 + 60) + drum type jumper wire (Option)
3. Mixed loading of 26 mm and 52 mm tapes is available. NM-EJA2A
1. Taping width 26 mm
60 inputs + drum type jumper wire (Option)
2. Taping width 52 mm (Pack width Max. 80) 60 inputs + drum type jumper wire (Option)
3. Mixed loading of 26 mm and 52 mm tapes is available.
Insertion height  Insertion height programmable according to the component diameter
and lead diameter.
Clinching angle  15°to 30° inner clinching
Clinching length

 1.5 ± 0.3 mm (Reference size: 1.5 mm)*

                 AV131 1

    *The above numerical range indicates the variation which arises due to
     differences in the diameter or material of inserted component leads           and in the diameter of holes of PCBs.
    *When changing the clinching length (changing reference size), the             anvil unit parts need to be replaced. (Individually supported)
    =REMARKS=
     1. A clinch mark will be left after cutting or clinching.
         The shape of clinch mark varies with the lead diameter or material             of  the inserted component.

     2. Clinched component will be tilted a maximum of ±10° in the 

      horizontal  direction due to the hole diameter of PCB or accuracy of

      hole position.

                                 AV131 2

Av131

     Shenzhen Keith Electronic Equipment Co., Ltd." located in Baoan District, Shenzhen. It is a supplier of AI and SMT equipment, spare parts, consumables and auxiliary consumption materials in China. Over the years, we have provided advanced equipment and parts for our customers to ensure high-quality service. And for exporting market, we are planing to developing Europe, North America, South America, Southeast Asia,India and where need SMT equipment spare parts.
     Business philosophy: cooperation, win-win, innovation, mutual assistance
     We have been adhering to the brand management concept of "focusing on product quality and customer needs", through the implementation of open innovation, excellent operation management, human resources development and other strategies, to comprehensively construct the core competitiveness of the company, create customer and social values, and win the unanimous praise of the vast number of customers and society.
    Main products:
    Panasonic Insertion Machine, Panasonic Insertion Machine Parts, Panasonic Placement Machine, Panasonic Placement Machine Parts, Panasonic Feeder & Feeder Parts, Feeder Trolley, SMT Cutter etc. To learn more about our products, please contact us through the following email address, look forward to your cooperation!

Send Inquiry

Product Alert

Subscribe to your interested keywords. We will send freely the latest and hottest products to your Inbox. Don't miss any trade information.

版权所有 © 宁波全贸信息技术有限公司 浙ICP备12012821号-1 浙B2-20200628