Palisade Fence /PVC Palisade Fence/CHINA FACTORY PALISADE STEEL FENCING SUPPLY

  QYM- Palisade fence   It is widely accepted as the industry leader to protect and deter general attack from all types and conditions of intrusion. Palisade fence is constructed using a post, rail and paling system. The security level of the fence can be increased by increasing the height of the fence, adding the pale numbers of each panel or increasing the thickness of the pale. The pales are made from hot formed and cold rolled steel belt,These belt offer both strength and rigidity combined with a long life span.   QYM-Palisade normally produce three types of pales, "W" ,"D" profiles and angle iron : Pales- "W" section Most using type for palisade fencing as vertical pales ,it is always the first choice for the pales .  

Width	Thickness	Surface Treatment	Head	Height
68mm   -  70mm	2.0mm 2.5mm 3.0mm	Galvanized and  Electrostatic polyester powder coated or hot dipped galvanized	Single point Triple point	1200mm
				1500mm
				1800mm
				2000mm
				2100mm
				2400mm
				2700mm
				3000mm

      Comparing with "W" profile pales , this type is more economical.   

Width	Thickness	Surface Treatment	Head	Height
68mm   -  70mm	2.0mm 2.5mm 3.0mm	Galvanized and  Electrostatic polyester powder coated or hot dipped galvanized	Single point Triple point	1200mm
				1500mm
				1800mm
				2000mm
				2100mm
				2400mm
				2700mm
				3000mm

    Its cost is similar with "D" profile ,and more simple than "D" profile.  

Width	Thickness	Surface Treatment	Head	Height
40x40	2.0mm - 3.0mm	Galvanized and  Electrostatic polyester  powder coated or hot dipped galvanized	Single point	1200mm
				1500mm
				1800mm
				2000mm
				2100mm
				2400mm
				2700mm
				3000mm

    As a connection pipe for the fence panels ,IPE type is the most using way.  

Size	Thickness	Surface Treatment	Head	Height
100x55mm 100x68mm 120x74mm	3.5mm 4.0mm 4.5mm 5.0mm	Galvanized and  Electrostatic polyester powder coated or hot dipped galvanized	Cut sharp	On the fence height basis

    Variations  for post In addition to the standard posts many variations are available to accommodate site requirements: • wall fixing plates, cranked posts or base plated •with cranked or straight extensions for barbed or razor wire • cranked panels

Size	Thickness	Surface Treatment	Holes	Length
50x50 40x40	5.0mm 6.0mm	Galvanized and  Electrostatic polyester powder coated or hot dipped galvanized	With19 holes drilled on one edge side	2710mm

  General Use: *Electricity Providers and Regional Networks *Water Industry *Telecoms Industry *Police and Law enforcement *Railway Line/Track Protection *Motorways and Highway Protection *Channel tunnel and European Transport networks *Schools, Colleges & Universities *Research Laboratories