Specifications 1. HID kit factory price
2. 18 months warranty
3. Faulty rate <1%
4. Ballasts & Bulb separately: Yes
5. CE&Emark
OSRING Quality Products mini ballast hid kit hid ballast 12v and hid canbus ballast
HID ballast Specifications
Ignition Voltage | 23KV |
Acceptable Voltage Range | 9V-16V |
Normal Working Voltage | 13.2V |
Output Frequency | 250HZ |
Normal Current | 3.5A |
Max. Input Current | 6.5A |
Rated Output Power | 35W (55W is also available) |
Case Working Temperature | -40~+105 |
Input Low Voltage Protection | 9.0V 0.5V |
Input High Voltage Protection | 16.0V 0.5V |
Open Circuit Protection | Automatic Protection in 1s |
Short Circuit Protection | Automatic Protection in 3s |
HID Xenon Kit Life Span | 2,500 hours |
Instructions: 1,Please wait for the entire cool-down of the car lighting and engine for the sake of safety in installation. 2,before the installation,please confirm that the gear is at ‘N’ or ‘P’.Please insure that the switch is off in installation. 3,Be carfull to avoid scald,especially in turning on/off the car lighting.Be careful to avoid beating and cutting bulbs,not to touch bulbs with fingers,which will bring blot. 4,Be careful to examine the connection of the contactor,ports and voltaic wire.False connection will bring on lighting problems. 5,Please let the end of bulb not touch the interior light shield of the headlight assembly when adjusting the bulb. 6,Please drill a hole of 25mm in the back cap of resin or rubber on the headlight.In connection the bulb and the step-up transformer,do not connect the wrong electrode. 7,In putting through the power supply of a step-up transformer,do not connect the wrong electrode. Installation: 1,Please open the hood and take off the assembly of the headlights on the two sides(left and right).In the case of enough room for installation,the headlights may not be taken down. 2,Open up the back cap of the assembly of headlights and take out the original bulbs. 3, Drill a hole in the middle of the back cap with a 25mm cutter. 4,Take down the plastic cover surrounding the HID head lamp. 5,Put the HID head lamp into the headlights. 6First plug the bulbs wiring harness into the rubber base,and then put it into the back cap of assembly.After that,please shut the headlight shield tightly. Why us: 1,Less than 1% defect rate, 18 months warranty 2,Fast delivery, variety shipments, FOB Huangpu 3,1 sets MOQ to test quality is acceptable 4,Experience factory, quality and competitive, Ex-factory 5,Experienced and qualified after technology support and after sell service 6,More than 5 years experience, fame, worldwide customers’ trust Factory Pics:
Certification:
Trade terms: 1,Sample order available. 2,Wholesale Ex-factory and FOB price. 3,Paypal, T/T and Western Union Available. 4,Deliver by air express, by sea and by air worldwide. 5,Super attractive brand packing, Neutral packing and OEM available.