ore flotation separator SF8 / dissolved air flotation system / mineral flotation separator

Specifications 1. Large inspiratory capacity, low power consumption;

2. Air and slurry are naturally sucked without need for foam pump

  SF Flotation Machine Introduction SF series flotation machines are new products of our company, which introduced the international advanced technology, and borrowed ideas from decades of manufacturing experience. At present, it is already in absolute leading level at home and abroad. And the new structure of impeller is backwards inclined double impellers equipped with honeycomb duct and dummy bottom. Therefore, the slurry in the tank will cycle upward and downward in a fixed flow manner, which is helpful to the suspension of those coarse particles. Air and slurry are naturally sucked without need for foam pump. Besides, mine impeller flotation machine for the self-absorption air flotation machine mechanical agitation for non-ferrous metals ferrous metals non-metallic minerals such as sorting.   Working principle
When the mine is grinding or after grinding, add water and necessary medicine produces the mine slurry after mixing, feed into the chute that begin to mix, add air into mine slurry to produce lots of bladder .The mine that not easily wet by water attaches the bladder and float to the surface of mine slurry together to produce the mineralized bladder floor .And the rest leaves in the mine slurry and discharges the mineralize bladder to reach the concentrating purpose.

Features and Benefits
1. Large inspiratory capacity, low power consumption;
2. Air and slurry are naturally sucked without need for foam pump; 
3. Allocated horizontally is easy for changing the flow, reasonable circulation, and maximum reduction of the coarse sand aeration;
4. Automatic control device and convenient adjustment.

The use and maintenance of flotation machine
1. The capacity and time limit of flotation machine depends on the maintenance and keeping every main assembly works normally, every part should be examined once every 3to 4months .In the first months of works, should be examined often. 
2. Only the skilled worker can examine the machine.
3. In order to change the assembly in time, should store whole set of easily destroyed assembly .The quantity and time of use depends on the fact use.
4. Only the skilled worker can operate the machine.
5. To prevent the swag, adding the oil should have the filter .When the flotation machine works, the oil cover should be sealed.
6. Before staring, should contact with other every procedures.
7. Starting order: press strobe switch, and the start button.
8. After starting, forbid to touch the rotary part.   For more information, you could visit our web site or contact me directly. Skype Id: lilymao1985 Mobile Phone: +86-18817261821 Lily