NZG - 36 Combustion Rail Drilling Machine

Product introduction:
1. NZG - 36 combustion rail drilling machine is rail way rail dedicated drilling tools. This machine is used for a wide range of online road and construction of maintenance work can be used; This light weight, small volume, portable machine. Card is installed firmly when working, accurate installation, removed rapidly, can effectively guarantee the driving safety.
2, Hollow, high speed steel drill bit, drilling time is short, high precision, long service life.
3, the machine adopts the spindle cooling structure, equipped with high-pressure cooling pot.

The main technical parameters:
Engine: Honda GX35 1.2 KW
The hole diameter: 9.8-36 mm (drilling)
Rated speed: 270 RPM or higher
The position of the drilling accuracy, hole tolerance of 0.5 mm or less
Drilling time: Drill through a time 30 s or less
The whole machine quality: 20.5 kg
Dimension: 495 * 320 * 400 mm.
Apply to 43-60 kg/m all kinds rail
Use method and maintenance:

1, first check whether the body in good condition, pot filled with water, reference manual add fuel gasoline engine.

2, drilling machine idling for a minute, check the transmission part is flexible, the presence of abnormal noise, connection is loose, the cooling water was clear and so on.

3, CARDS, to choose the aluminum (43, 50) will drilling rod pressure rail surface. To drill steel fixture card into the drilling rod grooves, and the lock. Drilling, drilling rod to adjust the pitch.

4, in every parts work without exception, the feed plate, can implement drilling, drilling needs to note when the bucket down in order to ensure the cooling liquid injected to the drill bit, prolong the service life of drill bit. Such as drill Φ 9.8 13.5 do not need to wear a note inside the kettle, USES the note
Maintenance:

1, check the body are in good condition before use gasoline engine (gasoline engine reference manual). Otherwise can't use.

2, should be timely after water injection or oil will fall in the body of the foreign body dry, keep the machine clean.

3, if long time should be placed in ventilated, dry, non-corrosive gas inside the warehouse.

Safety precautions:

1. Check whether gasoline engine running normal gasoline engine (gasoline engine reference manual).

2. The machine is equipped with watering can, water injection must refill coolant in the process of drilling, to prolong the service life of drill bit.

3. During the process of drilling, feed operation to push when appropriate, don't be too fast, too fast, found that the abnormal rotation, should reduce pressure, in case of overload.

4. The body spindle feed pull the internal gear to blot out the hydraulic oil or oil on a regular basis.