Supplier evaluation strength (ISO Certification & BV authentication)
Product Description 1 Product Name: Non Pollution Modular Water Storage Tank 2 FRP Tank Introduction GRP Sectional Panel Water TANK consists of panel(bottom, wall, roof) and reinforcing angle.
GRP Tank Panel are manufactured from SMC(sheet molding compound), utilising the hot press method.
Being manufactured from SMC, the tank itself is maintenance free with the long life that comes from being manufactured from reinforced composites..
Easy installation with on site bolt assembly and Tank shape and volume can be freely designed with no restrictions based on site location, weather or climate. 3 Veneer physical and chemical properties
project | Performance index |
Tensile strength,Mpa | ≥60 |
Bending strength,Mpa | ≥100 |
Bending modulus,Gpa | ≥7.0 |
Pap hardness | ≥60 |
Bibulous rate,% | ≤1.0 |
Glass fiber content,% | ≥25 |
4 Water tank performance
project | requirements |
leakage | No leakage after filled with water |
Full of water deformation | Filled with water, wall maximum deformation after no more than 1.0% of the tank bottom center height, no more than 10 mm maximum deformation |
Water quality | Accord with GB5740 |
5 FRP tanks are suitable for use in the following applications *Potable Water Storage (drinking water)
*Rainwater Harvesting & Storage
*Emergency Water Storage
*Pump Chambers
*Effluent treatment & Storage
Product pictures 001
002
FRP tank panel 001
002