motor operated valve for oil and gas with position indicator and manual override function for replacing solenoids valve

Specifications servo valve CWX-15Q

1 size:1/4"-1" brass valve.

2 volt:3-6V,12V,24V,220V

3 presssure:1.0mpa

Stainless Steel Motorized Ball Valve motor operated valve for oil and gas with position indicator and manual override function for replacing solenoids valve

Stainless Steel Motorized Ball Valve specifications:
120 Volt 2-way Housing Material ABS Body/Ball/Stem CPVC 316 Stainless Steel Valve 1/2", 3/4", and 1" NPT (Female) Seal EPDM Rating IP67 Seat PTFE Max Power 5 W Max Torque 2 Nm 2 wires normally closed function Visual indicator and manual override 100000 times service life.  Maximum Pressure 232 psi Max Delta P is 100 psi Ambient Temp -4F to 113F (-20C to 45C) Maximum Temperature 140F (60 C) Current 25 +/- 5 mA To fully close Running Time 5 t0 7 seconds Open amp; close time: 3 to 5 seconds. Anti water hammer slow close function. Without costly and bulky spring return actuator, the valve will normally close by the way of built in capacitor when power off Max Temperature: 100 C (212 F) Very low working current, can be suitable for battery operating. Small amp; compact design, very suitable for small equipment. To guarantee the best working performance, charge the valve for 60 seconds when you first use the valve. The mini 2 -way motorized ball valve design as an economical alternative to solenoid valves for use in popular applications: 
High fouling heating & cooling water systems  Different water control system Water recycling Water purification Water treatment.  Center heating & cooling water system HVAC Automated leak detection  Water shut off system electric brewing system Solar heating systems Campus IC card systems Water saving systems  Automatic irrigation Water purification & filtration systems Sprinkle systems